Share your ENSLD Experience

Just took my Exam. All the questions were the same as on the Chan dumps.
For studying purposes I used the CBT nuggets online course and completed it in 6 months.

i have latest dump which is 100% valid .. silver07 geeeemail

correction Silver097 g m a i l dot c o m
open to swap valid CCIE dump for AWS professional dump

Captor

Passed too today using Chan dumps v2. The questions were the same ones i found on the exam.

hi all,
Just passed my exam since 1 hour, it was easy with dumps.
This is the materials i used, udemy courses and Chan dumps (all questions were the same).
Next Juniper Exams.

CHAN IS FAKE FAKE FAKE everyone saying pass using chan dump are lying FAKE FAKE SCAMMER

CHAN IS FAKE FAKE FAKE everyone saying pass using chan dump are lying FAKE FAKE SCAMMER

CHAN IS FAKE FAKE FAKE everyone saying pass using chan dump are lying FAKE FAKE SCAMMER

Exam Passed
I took the test this morning and am relieved to have passed it.
Before the exam i was afraid to encounter new questions but no new question encountered.
All the questions were from Chan group

Hi all, passed the exam on 5 Feb everything is the same as premium

Totally agreed with dumps but I see only 2-3 new questions on phyton, wifi

????.??

Hi everyone, is Chan a scam or not, seems to me his link is not free at all ! Can someone please share the dump ?

Thanks Chan, passed too using the same dumps shared in the group

Hi everyone

I have just fail my exam using the Chan dump. Only 3 questions were from the Chan dump. the other 58 were totally different. the worst thing was that I paid for that exam and it has been a waste of time and money. I do not know if it has changed today but my exam was totally different to the Chan dump.

Good luck for everyone

Regards

i cannot believe you bought chan dump lmao it is so obvious these people are here to scam us lmao

After a month of intense study, I passed this exam with a score of 94% (940) despite having no prior experience in the IT field, and this is my first certification. Pheeeeww, I thought I had failed the exam halfway through. Thank you to everyone in this community. Seriously, you guys were a huge help to me. I used Chan dumps, all the questions were the same on the exam.

I succeed my exam today with the help of Chan materials.

Hi Guys,
Today I passed my exam, and thank god then to this community for the help.
My post composes the following:
Mental state and hardship
Resources (lessons learned)
Exam experience & topics to look out for in the exam.
All the questions on the exam from Chan dumps.
Thank you,
Regards,

Premium definitely valid, about 3 to 4 new questions (got 96%)

Just know all the material on this file well and you will be fine

ｃｐｋｑ．ｔｋ

NEW QUESTION 167
The Cisco Unified Wireless Product supports WMM. On which Wi-Fi Alliance interoperability standard is this based?

A. 802.11e
B. 802.11i
C. 802.1x
D. 802.11ah

Answer: A

NEW QUESTION 168
An engineer implements all remote sites using WLAN in FlexConnect with local authentication and the site experiences delays greater than 300 ms RTT. Which feature is disabled on the infrastructure?

A. AAA override
B. MFP
C. aWIPS
D. Local Auth

Answer: A

NEW QUESTION 169
Your network has these characteristics:
– CAC mode is set to load-based CAC
– The bandwidth usage is between 75 and 85 percent
– The reserved bandwidth for voice calls is exhausted
Which action occurs to TSPEC requests in this environment?

A. The normal TSPEC request is rejected and the expedited bandwidth request is admitted.
B. The normal TSPEC request is admitted and the expedited bandwidth request is rejected.
C. The normal TSPEC request is rejected and the expedited bandwidth request is rejected.
D. The normal TSPEC request is admitted and the expedited bandwidth request is admitted.

Answer: A

Hola! i got 97% all are dnd nd qs are same is in file

?????.??

Passed too since few minutes using Chan bank questions, all the questions are reel and found on the exam

Me too , i got my certification this morning with Chan materils.

Thank you Chan ,
Passed since few minutes.
First of all i want to thank YOU! I passed the exam easly with your dumps.
Now, time to take some rest! then prepare for another certification.
Ciao

since few minutes is not a term a native speaker uses John liar liar pants on fire :D

Thank you Yamil, i passed too this morning, i can say now that Chan dumps are 100% is valid and stable

Hello!

Wrote my 300-420 exam online at home yesterday and passed it luckily!

NO NUMERIC SCORE IS GIVEN! JUST ONLY PASS OR FAIL!!

A lot of new questions.

I mainly learned the PassLeader 300-420 exam dumps (190q+ version), most of the new questions updated recently are available in the newest version of PassLeader 300-420 braindump.

Good luck!

Thanks Jonathan, passed me too with it. 160 Q dumps is valid.

Penelope is thanking Jonathan for what? :D hilarious, you should write comedy

Shame can’t come here anymore for actual help

Passed using the same dumps used by Chan in this forum.
NUMBER of Questions : 160 Q&As

ENSLD passed
Today was the first day, where you could write the exam. In the end I scored 95%, which was not bad overall.

I really liked the exam, even though there were some obvious typos.

It has 100+ questions and you have 120min to complete. I would say you feel really tired after 60+ questions.

ALL THE QUESTIONS ARE IN CHAN DUMPS
Feel free to ask if you have any questions!

Grats Raul. Can you email me a copy of the dumps. Gentao2005 @gmail. Com

Raul,

Nope, questions are ~62 and 90 mins to complete ;)

Passed by using this pdf only 96%. Couple of new questions New qs added in part 9 were also in exam

????.??

I failed today. i was using the PL dump with 194q.
The exam had at lesat 18 new quesions which are not at PL. and even the ones that are on PL are not all correct. so PL is not very reliable. can anyone recomend me a better Dump???

i forgot to add the Exam had a total of 61Q

I success in the exam today as well, i used Chan dumps and some courses to study in udeemmy.
every questions i found in the exam was from Chan dump, thanks to everyone here

@Tony, same for me with PL194 I had 162Q I’d say around 12q not in PL. do you know the wrong q’s in PL? I am hoping for PL update soon as cannot find any better options.

@Covop unfortunately i dont know which are wrong, i just hope there is a more reliable dump then PL

Passed today. It was very tough! Questions were really deep.

I thought I will fail but thanks God. Passed it! with the help of Chan materials. All the questions are identical.

I failed today. i was using the PL dump with 194q.
The exam had at lesat 18 new quesions which are not at PL. ¿can anyone recomend me a better Dump? PL is not very reliable :(

Anyone ever try the spoto dumps. Knew a ccie that sweared by them

Anyone who passed the exam using PL dump ?

I noticed there are many Differences on the Answers in the Chan Dump Compared to the PL Dump. which one is more Reliable.

Today I passed the exam with 96% !
Finally, I made it after all these times. I have been waiting for this moment. Took me 9 weeks of self-studies to pull this off.

i recommend Chan dumps above all the questions i found on the exam are from this dumps

CAN PLEASE SOMEONE CONFIRM THESE QUSTIONS WHICH OF THEM ARE RIGHT

QUESTION 7
Which design consideration must be made when us-ing IPv6 overlay tunnels?
A. Overlay tunnels that connect isolated IPv6 networks are considered a final IPv6 network architecture.
B. Overlay tunnels should only be considered as a transition technique toward a permanent solution.
C. Overlay tunnels should be configured only between border devices and require only the IPv6 protocol stack. D. Overlay tunneling encapsulates IPv4 packets in IPv6 packets for delivery across an IPv6 infrastructure.

Chan Answer: C
PL Answer: B

Refer to the exhibit. EIGRP has been configured on all links. The spoke nodes have been configured as EIGRP stubs, and the WAN links to R3 have
higher bandwidth and lower delay than the WAN links to R4. When a link failure occurs at the R1-R2 link, what happens to traffic on R1 that is destined for a subnet attached to R2?
A. R1 has no route to R2 and drops the traffic
B. R1 load-balances across the paths through R3 and R4 to reach R2
C. R1 forwards the traffic to R3, but R3 drops the traffic
D. R1 forwards the traffic to R3 in order to reach R2

Chan Answer: D
PL Answer: A

QUESTION 17
Which two steps can be taken to improve convergence in an OSPF network? (Choose two.)
A. Use Bidirectional Forwarding Detection
B. Merge all the areas into one backbone area
C. Tune OSPF parameters
D. Make all non-backbone areas stub areas
E. Span the same IP network across multiple areas.

Chan Answer: CD
PL Answer: AC

QUESTION 23

Refer to the exhibit. An engineer is designing an OSPF network for a client. Requirements dictate that the routers in Area 1 should receive all routes belonging to the network, in-cluding EIGRP, except the ones that originated in the RIP domain. Which action should the engineer take?
A. Make area 1 a NSSA.
B. Make area 1 a stub.
C. Make area 1 a standard OSPF area.
D. Make the area 1 routers part of area 0.
Chan Answer: B
PL Answer: A

QUESTION 29
An engineer must connect a new remote site to an existing OSPF network. The new site consists of two low-end routers, one for WAN, and one for
LAN. There is no demand for traffic to pass through this area. Which area type does the en-gineer choose to provide minimal router resource utilization, while still allowing for full con-nectivity to the rest of the network?
A. not so stubby
B. totally not so stubby
C. totally stubby area
D. stubby area

Chan Answer: D
PL Answer: C

QUESTION 31

Refer to the exhibit. AS65533 and AS65530 are announcing a partial Internet routing table as well as their IP subnets. An architect must create a design that ensures AS64512 does not become a transit AS. Which filtering solution must the architect choose?

A. no-advertise
B. next-hop
C. no-export
D. maximum-prefix

Chan Answer: C
PL Answer: D

QUESTION 32

Refer to the exhibit. An architect must create a stable and scalable EIGRP solution for a customer. The design must: conserve bandwidth, memory, and CPU pro-cessing
prevent suboptimal routing
avoid any unnecessary queries
Which two solutions must the architect select? (Choose two.)
A. route summarization
B. prefix lists
C. distribute lists
D. stub routing
E. static redistribution

Refer to the exhibit. An architect must create a stable and scalable EIGRP solution for a customer. The design must: conserve bandwidth, memory, and CPU pro-cessing
prevent suboptimal routing
avoid any unnecessary queries
Which two solutions must the architect select? (Choose two.)
A. route summarization
B. prefix lists
C. distribute lists
D. stub routing
E. static redistribution
Chan Answer: AC
PL Answer: AD

QUESTION 45
A company with multiple service providers wants to speed up BGP convergence time in the event a failure occurs with their primary link. Which approach achieves this goal and does not impact router CPU utilization?
A. Utilize BFD and tune the multiplier to 50
B. Lower the BGP hello interval
C. Decrease the BGP keepalive timer
D. Utilize BFD and keep the default BGP timers
Chan Answer: C
PL Answer: D

QUESTION 50
How do endpoints inside an SD-Access network reach resources outside the fabric?
A. a VRF fusion router is used to map resources in one VN to another VN
B. Fabric borders use VRFs to map VNs to VRFs
C. SD-Access transit links are used to transport encapsulated traffic from one fabric to another
D. A fabric edge is used to de-encapsulate VXLAN traffic to normal IP traffic then transported over the outside network

Chan Answer: D
PL Answer: B

QUESTION 54
Which design element should an engineer consider when multicast is included in a Cisco SD-Access architecture?
A. PIM SSM must run in the underlay.
B. Multicast clients reside in the underlay, and the multicast source is outside the fabric or in the overlay.
C. Rendezvous points must be used in a PIM SSM deployment.
D. Multicast traffic is transported in the overlay and the EID space for wired and wireless clients.

Chan Answer: D
PL Answer: B

Which two border nodes are available in the Cisco SD-Access architecture? (Choose two.)
A. extended border
B. edge border
C. internal border
D. anywhere border
E. intermediate border

Chan Answer: AD
PL Answer: CD

QUESTION 58
Which control-plane protocol is used to map an endpoint to a location in a Cisco SD-Access network?
A. FabricPath
B. IS-IS
C. LISP
D. MP-BGP
Chan Answer: C
PL Answer: A

QUESTION 59
Which feature is required for graceful restart to recover from a processor failure?
A. Cisco Express Forwarding
B. Virtual Switch System
C. Stateful Switchover
D. Bidirectional Forwarding Detection
Chan Answer: A
PL Answer: C

QUESTION 76
An engineer must design a large Layer 2 domain that contains hundreds of switches and VLANs.
The engineer’s primary goals are to:

Efficiently utilize the bandwidth of all links
Avoid Layer 2 loops
Cause minimal impact on switch CPU and memory

Which technology should the engineer include in the design?

A. MST
B. Rapid PVST+
C. RSTP
D. PVST+
Chan Answer: B
PL Answer: A

QUESTION 87
Which solution allows overlay VNs to communicate with each other in an SD-WAN Architecture?
A. External fusion routers can be used to map VNs to VRFs and selectively route traffic between VRFs. B. GRE tunneling can be configured between fabric edges to connect one VN to another.
C. SGTs can be used to permit traffic from one VN to another.
D. Route leaking can be used on the fabric border nodes to inject routes from one VN to another.

Chan Answer: B
PL Answer: A

QUESTION 117
Which PIM mode uses a shared tree only?
A. bidirectional
B. sparse
C. dense
D. source-specific

Chan Answer: A
PL Answer: B

QUESTION 128
An engineer is designing a multicast network for a financial application. Most of the multicast sources also receive multicast traffic (many-to-many
deployment model). To better scale routing tables, the design must not use source trees.
Which multicast protocol satisfies these requirements?

A. PIM-SSM
B. PIM-SM
C. MSDP
D. BIDIR-PIM
Chan Answer: B
PL Answer: D

QUESTION 129
An engineer is working for a large cable TV provider that requires multiple sources streaming video on different channels using multicast with no
rendezvous point. Which multicast protocol meets these requirements?

A. PIM-SM
B. PIM-SSM
C. any-source multicast
D. BIDIR-PIM

Chan Answer: D
PL Answer: B

QUESTION 136
Refer to the exhibit. A customer needs to apply QoS to the network management traffic passing through the GigabitEthernet 0/2 interface. All eight
queuing classes are in use, so the new requirement must be integrated into the existing policy. Which solution must the customer choose?

A. Mark the traffic to DSCP CS6 and assign it to the ROUTING class. Then, prioritize traffic within the class.
B. Mark the traffic to DSCP CS2 and assign it to the ROUTING class. Then, baseline existing queue sizes to determine if additional bandwidth can be
provisioned to the ROUTING class.
C. Mark the traffic to DSCP CS4 and assign it to the SIGNALLING class. Then, prioritize traffic within the class.
D. Mark the traffic to DSCP CS5 and assign it to the SIGNALLING class. Then, baseline existing queue sizes to determine if additional bandwidth can
be provisioned to the SIGNALLING class.

Chan Answer: A
PL Answer: D

QUESTION 137

An architect must address sustained congestion on the access and distribution uplinks of a network. QoS has already been implemented and
optimized, but it is no longer effective in ensuring optimal network performance. Which two solutions should the architect use to improve network
performance. (Choose two.)

A. Configure selective packet discard to drop noncritical network traffic.
B. Bundle additional uplinks into logical EtherChannels.
C. Utilize random early detection to manage queues.
D. Implement higher-speed uplink interfaces.
E. Reconfigure QoS based on the IntServ model.

Chan Answer: BD
PL Answer: AC

QUESTION 148
An engineer needs a standards-driven YANG model to manage a multivendor network environment. Which model should the engineer choose?

A. Native
B. OpenConfig
C. IETF
D. IEEE NETCONF

Chan Answer: C
PL Answer: A

QUESTION 149
An engineer is working with NETCONF and Cisco NX-OS based devices. The engineer needs a YANG model that supports a specific feature relevant
only to Cisco NX-OS. Which model should the engineer choose?

A. Native
B. IEEE
C. OpenConfig
D. IETF
Chan Answer: D
PL Answer: C

QUESTION 151
An infrastructure team is concerned about the shared memory utilization of a device, and for this reason, they need to monitor the device state. Which
solution limits impact on the device and provides the required data?

A. IPFIX
B. static telemetry
C. on-change subscription
D. periodic subscription

Chan Answer: A
PL Answer: C

Hey guys , I want to share that I finally passed of the exam. Chan practice test helped me prepare by providing a lot of useful information and reel questions.

I mainly just wanted to share my perspective on the exam and I personally think that the exam is harder without practice test . It’s not enough to know the exam topics . You have to know the material and be able to interpret topologies and CLI statements FAST + memozire practice test questions and answers for 100% pass.

Is CHAN’s dump really valid ? as I see most of CHAN vs PL above seem to be incorrect answer for the chan…

No, it’s useless. PL is also not valid, requires update but 100% better than Chan crap

Chans dumps are a pile of steaming crap. PL is not up to date for current exam yet.

any other dumps anyone can recommend ?

Hey, maybe someone remembers my comments from previous comment complaining about not recirving score report nor certificate in time.

Well, turns out it took almost month (without 5 days…) To get official online score report and badge. And also few chats with Paerson Vue, but I doubt those had any effect.

So if anyone is worried for not getting any response in the declared 72 hours + 10 days for certificate, as it is on preliminary report, please be patient… :)

The exam was easy with dump, all the questions were from Chan practice test (passtoday.gq). I do not beleive i passed the exam.