Share your ENSLD Experience

@Passed $uccessfully : can you share the dumps ?

took the exam and failed today 812/825 used the PL. Now that I read this post found out that it did have many wrong answers. Does anyone have the correct answers by chance?

TAKE_THE_EXAM – What’s your email? Let’s discuss. I have the updated answers from PL as well.

@TAKE_THE_EXAM – What’s your email? Let’s discuss. I have the updated answers from PL as well.

POKEMASTER20132015 at gmail dot com

i have been working on these question in another forum and have a few answers fixed as well

Took the test today and failed by about 10 points. I used PassLeader and there were about 15 new questions on my test, including 5 new drag and drops. I knew the answers to a good number of the new questions, so if the only thing you know is from practicing the dumb, you will fail miserably.

PL needs a major update before it’s complete enough for you to pass.

Anyone can share valid dumps

@JDub, please how many questions are there in the exam?

@JDub, could you please share your PL dump ? I’m trying to make a new document with questions from all the dumps I’ve found.
Do you remember the Drag and drops as well ?
Thanks !

There were 60 questions on the exam and probably 10 of them were drag and drop. I don’t remember a lot of specifics from the new questions, but here’s the best I can do:

-1 subnetting question where you need to subnet a given IP range based on the number of devices needed. You need to come up with the ip range and subnet mask for each range.

-LOTS of questions about SD-Access and SD-WAN. You need to be familiar with components and their purpose. There were several drag and drops and multiple choice questions about this. You also need to understand, in depth, how to multicast in an SD-Access network as there are also several questions about this. The Cisco Press book covers all of these topics pretty well.

@JDub, that’s already a lot, thanks ! feel free to comment again if you have more information !

Hi all

Any update for new dump?

do we have a valid dumb as we speak? Thank you

Does anyone have PDF link for CCNP Enterprise Design ENSLD 300-420 Official Cert Guide?
I want to learn new material and stuff (maybe its similar as older books but rewritten the same stuff).
Since this book was announced at the end of August 2020, I guess Cisco is expecting PL to take this exam after learning and I guess next year 2021 will be more feedback to the community about experience from the exam etc.
this is why there are no much PL dumps etc.

Hello, Have anyone recently passed ENSLD 300-420 exam? what material did you use? how was your exam?

Hi, can someone please share study martial or how are you preparing for 300-420 ENSLD exam?

Passed, 9xx. 60q ia actual, only one new question about IS-IS design. Check 60q carefully, many wrong answers. Not so duficult exam.

@SM :Can you share please de 60 q dump?

@SM : Thansk for the information – congrats !
regarding the IS-IS question, was it this one ? :

When a network is designed using IS-IS protocol, which two circuit types are supported? (Choose two.)

nonbroadcast multiaccess
multiaccess
point-to-multipoint
nonbroadcast
point-to-point

Thank you for the information @SM. Congratulations! Which 60Q are you referring?

@Chris 300-430.VCEplus.premium.exam.60q

@Marduk, no, new ISIS question is how to design L2 and L1 area for several condition, I don’t see it before

@Marduk, No, it was absolutely new questioin about L1 and L2 router design for several condition

@SM – could it be this one ? :

A network engineer must segregate three interconnected campus networks using IS-IS routing. A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically. Which two actions does the engineer take to accomplish this segregation? (Choose two.)

Designate two IS-IS routers as BDR routers at the edge of each campus, and configure one BDR for all Level 1 routers and one BDR for all Level 2 routers.
Designate two IS-IS routers from each campus to act as Level 1/Level 2 backbone routers at the edge of each campus network.
Assign the same IS-IS NET value for each campus, and configure internal campus routers with Level 1/Level 2 routing.
Utilize different MTU values for each campus network segment. Level 2 backbone routers must utilize a larger MTU size of 9216.
Assign a unique IS-IS NET value for each campus, and configure internal campus routers with Level 1 routing.

@Marduk

Yes, this one.

I have answered
– Designate two IS-IS routers from each campus to act as Level 1/Level 2 backbone routers at the edge of each campus network.
– Assign a unique IS-IS NET value for each campus, and configure internal campus routers with Level 1 routing.

@SM – can u share link for 300-430.VCEplus.premium.exam.60q

@SM -can u share a link to your dump. Thanks!

A network engineer must segregate three interconnected campus networks using IS-IS routing. A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically. Which two actions does the engineer take to accomplish this segregation? (Choose two.)

Designate two IS-IS routers as BDR routers at the edge of each campus, and configure one BDR for all Level 1 routers and one BDR for all Level 2 routers.
Designate two IS-IS routers from each campus to act as Level 1/Level 2 backbone routers at the edge of each caewqmpus network.
Assign the same IS-IS NET value for each campus, and configure internal campus routers with Level 1/Level 2 routing.
Utilize different MTU values for each campus network segment. Level 2 backbone routers must utilize a larger MT

Guys , i wrote the exam 300-420 and failed; i used a dump i saw that was updated for august 2020 . Most of its questions came but i got burnt with some i didnt expect !!

Back again. as i managed to find the 300-420 ebook online;
I also remember some of the questions that i had;

* regarding subnetting:
drag from right to left (some subnets not used)

(subnets below shown) (number of host given)

10.1.1.112/26 5 host for x department
10.1.1.96/28 30 host for y departent
10.0.0.0 /29 14 host for z department
10.1.1.64/26 8 host for xx department
10.1.1.96/26
10.1.1.8/25

(note: so it seemed, i remember very well ! sure were /26, /27, /28, /29 ; )

* Another question was:
Drag and drop

vBOND manages blah blah blah
vSmart forwards, directs packets blah blah blah
WAN edge Orchestrates blah blah blah

(note: correct answer now that i checked;)
vBOND — orchestrates
vSmart —- controls
WAN edge / vEdge —– forwards

** anther new question was:

Names of Nodes in SD-WAN access (choose two)

– External border node
– Border node
-Internal border node
– Edge node
– blah blah blah

(correct are: Border and Edge node)

** Another question was:

– how is the redundancy of the controllers maintained?
– each region has a controller
– All ip addresses tied to DNS
– BLAH BLAH BLAH

(This i was and still not sure; but i had selected ” tied to DNS)

*** i will keep remembering other questions; seems reading the book now; ill book again FOR SURE I WILL PASS NEXT TIME since i lacked just few points to make it and the above where those that pinned me down)

@xxfactor,
i’ve got a dump i’ve made and i think most of your question could be in it.
Could you tell how i can reach you to talk about it ?
thanks
M.

@xxfactor
there is a dump available on the forum of certcollection – could you check if the new question are on it ?
Thanks,

Hi, does anyone has an update on this please? Thank you.

Cisco.braindumps.300-420.v2020-03-18.by.maya.86q

I checked and ABSOLUTELY !!!! Those are VALID!!
But as i mentioned above in my loooong post are the NEW questions that you need to pay attention to.

** Beleive me, you dont want to fail with just missing 1 or 2 questions (8 or 10 points)
** I have checked google search and dumps for the subnet questions 10.1.1.x to host but could not.(that is a drag and drop)

I Will be going for a second try soon and will update.

I AM NOW CONFIDENT

@Xfactor
i strongly advise you to check the dump in certcollection forum – there is your subnet question as a drag and drop.

Also, there is a lot of wrong answer in the maya dump.

Passed using the same dump of Barnes

Thank you guys

Anyone tried the 300-420 dump on ExamTopics . Com?

@Xfactor can you verify that the examcollection website has valid dumps?

I passed the exam today using the dump shared by Chapman

Thank you all

Next CCNA Sec

Hi all
Yes, I have all Latest 2021 Real CCNA, CCNP exam questions in cheap cost. If any want then contact me alisroman 161 @ g mail . c o m*

@ColdBrew how many new question? I will take my exam on 29 Jan. Is it enough to take Examtopic?

Hi guy, i pass the exam with 919 score. It has 62 question. I took Examtopic and Certcollection with 100%legit. But it has new 23 question. I suggest you have to read more than dump before take the exam. Goodluck everyone. #CCNPEnterpise

@POR, Congrats !
So, you had 23 new questions ??
Any example of the new question ?
thanks !
M

bro certcollection is down. can you provide link to share ??

@Mardouk sorry i don’t remember. btw i use MCQ version 4 for my preparing.
One question i remember is …. qos to avoid choppy phone traffic.
A …..
B …. policy
C ….. shaping
D…..
Sorry agian that all i remember

@POR,

That’s already some good knowledge, thanks :)

And glad that the MCQ v1.4 was usefull !

Regards,

M

Passed using the same dump shared by George

Just a question, I need to re-certify on my CCDP, by taking the ENSLD 300-420 exam, will this re-certify me on my CCDP?

Hi,

I passed the Cisco ENSLD exam last week.

The exam was challenging but if you study the OCG book plus you watch any video training like ITproTV (Anthony Sequeira) or CBT nuggets will really help you to pass the exam.

Pay attention to the SDA an SDWAN topics there are a few questions. It is also important that you have some experience on the field in order to understand all protocols and technologies covered on this books.

Good LUCK!

Hello, does someone has the last dump? How can I get the last dump for 300-420?
I appreciate you.