Share your CCDA v2.1 Experience
The new CCDA DESGN 640-864 Exam has come to replace for the old CCDA 640-863. It will take some time to update this site with this new exam. In the mean time we create this “Share your CCDA v2.1 Experience” section for everyone to share the experience after taking this new exam.
Please share with us your experience after taking the new CCDA 640-864 (CCDA v2.1) exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
@Anton
Do you remember D&Ds from your exam?
@Simcox
Congrats!!!
And, would you like to share that PassLeader 200-310 dumps in VCE file with us???
I failed the test last week and I urgently need that valid PL 200-310 dumps with 471Q updated on 7/Sep/2017.
Thanks in advance!
@fakeuser
From the dump with 372Q I had these D&D:
QUESTION 291
Drag the network characteristic on the left to the design method on the right which will best ensure redundancy at the building distribution layer.
QUESTION 355
Drag the STP toolkit term on the left to the definition on the right.
@Anton, I just need to install Java JRE for running your VCE?
Thanks,
I passed today. the 295q is not enough to pass. There were a lot of new questions even on top of the ones in the prior pages here. Too many for me to begin to remember. The 2 drag and drops I had were in the 295q, and maybe 10 other questions.
I highly recommend seeking other information, studying the cert guide. I only passed because I have direct experience and have 4 other CCNAs that carried over to support the information in the CCDA. Good luck all, maybe new study material will be out soon. I scored a 88x and you need an 860 to pass. I had 60 questions.
Why did you study 295q? What about PL 200-310 dumps with 471Q?
Pass yesterday , i recommend , since there is so many new questions on the exam , please refer
to the latest dump , the older one are not enough to pass , there are so many new question, around 70 for me are new.
@Anonymous…if you have it…share it. I didn’t have it.
It was already shared it by Anton. Page 37.
https : / / rapidu . net / 1821816268 /
https : / / rapidu . net / 5021816248 /
@ Anonymous
good luck, you are studying old stuff.
There were about 10 questions and 2 drag and drops from everything here. As the dump numbers grow, it is just the old stuff being recycled and it is no longer valid.
Off to CCNP R&S
Good luck all.
New questions
What option is a fixed two layer routing protocols?
-ripv2
-ospf ***
-eigrp
-static routes
What router between two areas?
-Internal
-backbone
-area border ***
-autonomous border
Hi everyone!
@CCDP_Aspirant, Congratulations!
You or anyone who has, please share new 417Q.
maria (dot) gomesf 1956 (at) gmail dot com
Do you know if 326Q is it enough?
Thanks So much
@fakeuser
Where Did you find this new questions?
@Cupcake girl
On another forum.
326Q in not enough, as well as 417Q.
Read the previous page.
@Ahmad
Can you please share also PassLeader 200-310 dumps (471q dumps~~~NEW VERSION)?
Thank you and congratulations.
@sammy
No, they are not. That’s PL spam.
@fake user and everyone else. Fake user is correct. More new questions
Please look at anonymous on last page of 200-310 design experience 3 questions added
hello
anybody with new information about new questions
CCDA 200-310 Official Cert Guide guys can any one tell me where can I find this book
or please if you have and you are willing to share .
thanks
@Anonymous,
A feel days ago, Anton provides a link with his material:
https : / / rapidu . net / 1821816268 /
Package with all the dumps, vce, new questions from pages 29-37 and CiscoPress – CCDA 200-310 Official Cert Guide Fifth Edition (2016) here (remove the spaces):
https : / / rapidu . net / 5021816248 /
there are new question 22/09/2017 …who passes the exam to morrow or this week ???
who passes the exam to morrow or this week ???
anybody with new information about new questions
Hello,
If anyone has the 471Q exam please send me: leanny.salazaratgmail.com
who passes the exam this week ???
anybody with new information about new question
Passed today 9XX!
I’ve used the 326! It’s almost 90% there and some new questions (but not difficult questions).
2 x Drag & Drop (Port status and the other I don’t remenber)
Thanks for your feedback, New-CCDA! Congrats!
Passed today in 9XX oceania
There were about 6 or 7 questions I had not seen before and was not in new questions on here as well
lead4pass dumps which I got were about 50% which is same as gratis (not worth)
New questions on here were about 40% of exam
Thanks to Anton and others for posting new Qs
Hi! Just passed 200-310 exam LAST WEEK!!! 9xx/1000 points!!!
One ACI question, EIGRP and OSPF, OSPF routing, BGP, QoS questions, etc.
Drag & Drop:
STP (BBDU filter, guard, UplinkFast…)
Campus Layer 2 vs Campus Layer 3
And, more othere new questions……
I mainly learned PassLeader 200-310 dumps (546 Q&As~~~NEW VERSION~~~old 326q version has been updated), valid enough for passing now!
Part of PassLeader 200-310 dumps are available here:
ciscobraindump.com/?s=200-310
(546 Q&As~~~NEW VERSION~~~old 326q version has been updated)
Good Luck!!!
Got 916 today, only 40% you can get in the dumps. A lot of new questions in the exam. Anton already gave a good tip in the exams, but still a lot of new questions in the exam.
Good Luck to all!!!
@Anon
Please what oubout a new 6 or 7 question ….?
do you remembre this questions ?
Passed today, 962/1000.
326q is 50-60%.
Lots of questions mentioned here, plus some completely new.
Don’t be lazy, guys, at least read the study guide or watch CBT Nuggets training.
@ Fakeusr
can you please provide some new Q? Thanks and congratulations.
1-The tool for Cisco ACI to integrate l4-l7 service into the Service Graph
REST API
2-What to do at Microsoft DHCP server for AP to allocate the controller
Use the Suboption 0xe1
3-What should be considered when scaling eigrp
Peers
Query scope
IP Address
4-What is included in High Level Design documentation
included busineed, design architecture … do not have step by step configurations …
5-What statement about EVN is true
supports up to 32 VNET
6-What query should you make if you want to find all objects of a particular type in an MIT tree
class-level
7-Which two high-level design components are included in Unified Wireless network
local
Cisco FlexConnect
8-What are two advantages of a modular design
Increased scalability because modules can be increased with growth
Increased redundancy as you can add modules
9-n organization needs to implement isolated logical structure due to compliance regulations. What complex access control network virtualization method can it use
The IT organization creates a quarantine network for end points that do not meet the posture assessment requirements
10-What is the DCSP value for voice traffic
EF
11-QoS trust Boundary (there is a diagram)
Cisco IP Phone
12-Tool to decode protocols
protocol analyzer
13-What is the IPV6 global unicast address format
48 bit(Global Prefix)16bit(Subnet)64bit(Interface)
14-What are 2 “Class-FULL”
RIP
IGRP
15-VPN access policies
Central authenticated full access -> admins
Central authenticated controlled (limited) access -> partners
Central authenticated controlled (limited) access -> employees
16-How to reduce the size of a routing table
NAT
Summarization
17-VPN tunnelling technology for multicast
DMVPN spoke-to-spoke
18-What DNS parameter is used by an access point to determine the IP address of a WLC
capwap-controller
19-What is the normal condition of traffic flow and performances
utilization
20-why would an engineer implement variable-length subnet mask
to prevent waiting ip address
21-Which two are documented to understand environmental constraint
floor and rack space availability
heat and air conditioning
22-Which two design decision can improve network resiliency
implement redundant link
implement redundant topology
23-Which two network services should you host on the dmz
www
ftp
24-which statement about using stp in a redundant link scenario is true
it uses only one redundant link at any one time
25-what are two important aspects to consider when looking at backup circut optopns for branch location
internet service provide diversity
type of dynamic routing protocol
26-How many switches can be combined into a single network element using VSS
2
27-When a VSS configuration is reviewed,it is determined that the nodes are not detecting each other. Which option is the issue with the switche
The Switch virtual domains incorrect
28-Which statement about VSS is true
It can maintain the topology independently of STP
29-Which two methods are used to reduce the mesh links required between iBGP peers in the same AS
Route reflectors
Confederations
30-Which address is the broadcast address of subnet 120.20.78.8/30
120.20.78.11
31-A network engineer is implementing a new mesh WAN topology. The solution support synchronous bandwidth and allow for future growth? Which solution is best suited to meet these requirements
DMVPN over business class modem
32-raditionally, the DMZ exists between which two locations
Internet
Corporate Network
33-which statement about using STP in a redundant-link scenario is true
It uses only one redundant link at any one time
34-Company ABC has intermittent problems registering remote-site IP phones over the WAN with Cisco Unified CallManager at headquartes. The Company hires a network consultant to help implement QoS in its network. Which technique should the consultant use to identify traffic and applications that traverse the network
NBAR
35-Which statement about modular network design is true
It is flexible architecture that simplify design,management and troubleshooting
36- It is flexible architecture that simplify design,management and troubleshooting
DN
37-In Cisco ACI, which option is the unified point of automation , management , monitoring and programmable
APIC
38-Choose considerations for access layer design
QoS
Port security
39-Which cisco technology can connect more than two switches so that they behave as one switch
Stackwise
40-Which two processes are included in the Build phase of the Cisco Design Life Cycle
Validation
Deployment
41-When you make change on Network, what the consideration of environment Data center network network
Air condition and cooling
42-In an enterprise Layer 2 switched network, which protocol must ne running to enable link redundance
STP
43-A network architect working for a large financial institution is designing a vpn solution that must include encryption. which vpn type meet this requirment
GETVPN
44-three design best of the distribution layer
domain isolation
aggregation
summarization
45-What router between two areas
area border
46-What option is a fixed two layer routing protocols
EIGRP
47-A consultant at company XYZ connects to the guest wireless network but cannot reach the MGMT VLAN to complete an audit. Other users can connect to the MGMT VLAN without any issues. Why is the consultant unable to access the MGMT VLAN
The access is not permitted
48-In which phase of cisco design life cycle the validation of network infrastructure happened
Validation in build
49-What will extend a ((–>trust boundaryQoScost<– effective backup connectivity for a branch network
VPN over Internet
53-What is the best point to deploy the IPS, not to have false positives, since the traffic is already filtered
Passive of the Switch
54-How to reduce the size of a routing table? (Choose two):
Summarization
NAT
55-What are two classful routing protocols? (Choose two):
IGRP
RIP
56-Under which phase of the Cisco Design Lifecycle would you evaluate the network infrastructure for its adherence to best polices and corporate policies
In the Validation stage of the Build phase
57-Which option is an advantage of a Layer 3 access model over the traditional Layer 2 access model
faster convergence
hi, we are No.1 Online CCIE training Company all over the world with highest Passing Rate, we train for CCIE R&Sv5 and CCIE SPv4, CCNA & CCNP Security, CCNA & CCNP Datacenter, Vmware Courses. Our Students Pass the Lab exam with kNOWLEDGE & by learning Technologies for the first 4 months and than for the last 2 months, we focus on the real labs as we have verified solutions for real labs, also we have highest passing rate, you can contact us at expert.ccie.4133 at gmail.com
Passed today,
The IT-Libraries 471q dumps are valid.
Congrats!!!
Finally passed 200-310 exam on 14/Oct/2017!
I used the newest PassLeader 200-310 dumps (546q~~~New Version Dumps), all new 200-310 exam questions are available in the new PassLeader 200-310 dumps, which is valid enough for passing!!!
P.S.
Part of PassLeader 200-310 dumps are available here:
ciscobraindump.com/?s=200-310
(546q~~~New Version Dumps)
Good Luck!!!
fakeusr, thank you.
Your answers helped a lot.
Who did take the exam recently? is 326 Valid?
Can anyone share the dumps to pass?
@fakeusr the question posted are the new ones?
Anyone have the dump to pass ???? can anyone share please?
Hi Ramin Rocky :)
Kindly, could anyone update?
Anyone has dumps to pass the exam?
The 200-310 exam updated recently with many new questions!!!
Old version 200-310 dumps now are not valid enough for passing!!!
Recommend you to try the newest PassLeader 200-310 dumps (544q + 57q), all new questions are available in PL.
P.S.
Part of PassLeader 200-310 dumps are available here:
ciscobraindump.com/?s=200-310
Good Luck!!!
Harry you moron, stop send fake post !
Can anyone share CCDA dumps? Please send it to { pilzzee at gmail dot com }
Lastest pass leader dump ( IS NOT SCAM like others)
GigaMirror.com /download / UHZUNOZX
Very thanks Rocky for share this! Is actual ? Some people use this question in exam ?