Share your CCDA v2.1 Experience
The new CCDA DESGN 640-864 Exam has come to replace for the old CCDA 640-863. It will take some time to update this site with this new exam. In the mean time we create this “Share your CCDA v2.1 Experience” section for everyone to share the experience after taking this new exam.
Please share with us your experience after taking the new CCDA 640-864 (CCDA v2.1) exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
Its Cumpus Core Man/women
I have realised that there is now a new version of actual tests.
Cisco 640-864 : Designing for Cisco Internetwork Solutions Exam (DESGN) v2.1 334 Questions & Answers Updated: Aug 27,12
Anybody with this latest version
thank you Axe_c for your support
i was really confused and now i feel better :) . i am planing to take my exam on the coming Monday. so i will keep in touch with you through this website in case i have additional questions.
Hope to catch you here !!!!
what is the correct answer for the following question
1) At which stage in the PPDIOO process would you analyze a customer’s network in order to discover opportunities for network improvement?
A- Prepare
B- Plan
C- Design
D- Implement
E- Operate
F- Optimize
2) Which two of these are SCALABILITY benefits of designing a network that utilizes VPNs?(Choose two)
A. extends the network to remote users
B. allows networks to be set up and restructured quickly
C. reduces dial infrastructure expenditures
D. reduces the number of physical connections
E. simplifies the underlying structure of a customer WAN
3) In a Cisco CatOS switch, what is the recommended practice when configuring switch-to-switch intercommunications to carry multiple VLANs for Dynamic Trunk Protocol?
A. auto to auto_negotiate
B. auto to auto_no_negotiate
C. on to on_negotiate
D. desirable to desirable_negotiate
E. desirable to desirable_no_negotiate
F. disable Dynamic Trunk Protocol when operating in the distribution layer
Hi All,
please Can any one share with me the link to download CCDA 640-864 Official Cert Guide, 4th Edition? urgently please.
Br-A
What are three valid methods of gathering information about an existing data network? (Choose three)
A. Use organizational input.
B. Perform a traffic analysis.
C. Analyze the user-mapping of a running application.
D. Perform a packet-level audit to verify carrier service guarantees.
E. Perform a network audit to gather more detail about the network.
F. Use reports that analyze the metrics of the customer’s existing network.
Answer: A B E
but I think it should to change E to A ,what do you think about it ?
sry guy I mean in Lead2Pass answer for this question is B E F but my answer is A B E
Took exam today and passed. Dumps no longer valid, only around half of the questions in the dump appeared. Study with knowledge and not answers. I realised they tweaked some of the questions here and answers are opposite.
what do you think about this question
Which two of these are scalability benefits of designing a network that utilizes VPNs?(Choose two)
A. extends the network to remote users
B. allows networks to be set up and restructured quickly
C. reduces dial infrastructure expenditures
D. reduces the number of physical connections
E. simplifies the underlying structure of a customer WAN
refer CCDA official page 239
I think correct answer should be
D ,E
any idea ?
@CCDA – what prep material are you referring to when you say they are no longer valid?
thanks
Passed the exam yesterday; got 941/1000 all dumps are valid, 4 questions were modified, and the questions shared by Karma were there.
“Which three modules would typically utilize public IPv4 addressing ?
a) Branch Data Center
b) Access
c) Internet connectivity
d) Core
e) Data Center
f) E-commerce
g) Remote Access/VPN
h) WAN/MAN
i) Distribution
j) Branch
My Answer is CFG
D&D.
VLANs and VSANs
Cisco Unified Computing system
Cisco VN-link technologies,including the Nexus 1000V virtual switch for VMware ESX
VSAN,virtual device contents, and unified fabric
Virtual machine visibility and policy control
* Cisco VN-link technologies,including the Nexus 1000V virtual switch for VMware ESX
simplified data center infrastructure and TCO
* VSAN,virtual device contents, and unified fabric
Network,compute, and virtualization resources physically combined to deliver on optimized end-to-end virtualized environment
* VSAN,virtual device contents, and unified fabric
Physical networks and equipment set
* VLANs and VSANs
The evolution of the Data Center is best represented by the 3.0 architecture component of virtualization. Which of the following is not an example of the virtualization taking place in the Data Center ?
a) VLANs and VSANs provide for virtualized LAN and SAN connectivity, separating physical networks and equipment into virtual entities.
b) Virtual machines that run on application within the client operating system, is future virtualized and running on common hardware.
c) Storage devices virtualized into Storage pools, and network devices are virtualized using device contexts
d) virtualized media access utilizing Fibre Channel over Ethernet.
My Answer is B, it talks about Virtual Machine running on client operating system that *shouldn’t* be part of a Data Center”
Concerning the following question:
The evolution of the Data Center is best represented by the 3.0 architecture component of virtualization. Which of the following is not an example of the virtualization taking place in the Data Center ?
a) VLANs and VSANs provide for virtualized LAN and SAN connectivity, separating physical networks and equipment into virtual entities.
b) Virtual machines that run on application within the client operating system, is future virtualized and running on common hardware.
c) Storage devices virtualized into Storage pools, and network devices are virtualized using device contexts
d) virtualized media access utilizing Fibre Channel over Ethernet.
the correct answer as per my opinion is D
@ABC, first question august 25th: they are established at the campus core
@ABC, second question august 25th: campus core is optional, can be integrated with the data center
@ABC, question august 27th: it is C, need customer input
@ABC, question august 29th: it is the Design part
@ABC, question 2, august 29th: it reduces 2 things, all the rest are wrong
@ABC, question 3, august 29th: desirable-to-desirable-no-negotiate. Book is a little dark on this one
@Axe_c, question 1, august 30: the answer from dump is correct, BEF
@Axe_c, question 2, august 30: it really reduces dial infrastructure and physical connections
@ABC, question august 31: answer is B, got it on my exam as well. Virtual machines that run on application…
What are three valid methods of gathering information about an existing data network? (Choose three)
A. Use organizational input.
B. Perform a traffic analysis.
C. Analyze the user-mapping of a running application.
D. Perform a packet-level audit to verify carrier service guarantees.
E. Perform a network audit to gather more detail about the network.
F. Use reports that analyze the metrics of the customer’s existing networ
should be BEF
check CCDA official page 18 !
pass exam dump still valid but have new qustion around 20% about endterprise campus and.calculate ip v 6
be careful question that ask about “Enterprise Campus”
anwser must be one of them (up on question)
– Data center
– Campus core
– Building distribution
– building access
check CCDA official on Figure 2-5 for details
thank you ordermarker for your support
Which of these statements is true concerning the data center access layer design?
A. The access layer in the data center is typically built at Layer 3, which allows for better shaping
of services across multiple servers.
B. With Layer 2 access, the default gateway for the servers can be configured at the access or
aggregation layer.
C. A dual-homing NIC requires a VLAN or trunk between the two access switches to support the
dual IP address on the two server links to two separate switches.
D. The access layer is normally not required, as dual homing is standard from the servers to the
aggregation layer.
what is the correct answer plz
Which two of these represent a best practice implementation of a Split MAC LWAPP deployment in a Cisco Unified Wireless Network? (Choose two.)
32)
A. Each wireless client authentication type maps to a unique SSID which in turn maps to a unique
VLAN.
B. 802.1Q trunking extends from the wired infrastructure to the access point for translation into
SSID(s).
C. 802.1Q trunking extends from the wired infrastructure to a wireless LAN controller for
translation into SSID(s).
D. Each wireless client authentication type maps to a shared SSID which in turn maps to a
common shared VLAN.
E. Each wireless client authentication type maps to a unique SSID which in turn maps to a
common shared VLAN.
F. 802.1Q trunking extends from the wired infrastructure to a wireless LAN controller. Then the
802.1Q packet is encapsulated in LWAPP and sent to the access point for transmission over the
SSID(s).
33)
What is the name of the organization that is in charge of creating the FCAPS architecture?
A. ISP
B. IOS
C. ITU-T
D. IEEE
What is the correct answer
@ABC, first, correction on the question about the desirability. Answer is desirable-to-desirable and negotiate. It is listed in the CCDP Arch book (found it at last!)
@ABC, question 1, september 1: answer is B, configure at access or aggregation layer
@ABC, question 2, september 1: tricky question. Answer A is definitely true. I would go with A and C, since C seems more likely. D and E are wrong and I’m pretty sure F is wrong as well, so it’s basically a toss-up between B and C for the other right answer. I couldn’t find it in any book so far. Good luck with your exam.
hi everyone. i want to give these exam next week please help me.. is there any sims like ccna exam???
@neha
just multiple choice n Drag&drop totally 55 question
3 step for pass CCDA should be
1. read CCDA official book CCDA 640-864 Official Cert Guide, 4th Edition
2. exam sim with VCE 291 question
3. Recheck & Restudy indeep every question that you not understand
4. if you confuse about answer ,official book CCDA 640-864 is the last answer
@rudel mebeza – what prep materials did you use? is the Cisco.Lead2Pass.640-864.v2012-06-12.by.NordRacing still VCE valid?
@axe_c
thank u so much for your help. really appreciated
what is exam sim. that you mentioned in 2. point. can u upadate the link
regards
ABC How was the xam. I have mine tomorrow. Please give the info early
hey francis, unfortunately i have rescheduled my exam for the coming Thursday due to work commitments.
i wish you best of luck for tomorrow and kindly share us your exam
@francis
best of luck for your exam
Thanks guys one hour to go.
Note that there are latest dumps now
http://www.examcollection.com/cisco/Cisco.ActualTests.640-864.v2012-08-29.by.Nawaz.334q.vce.file.html
and
http://www.examcollection.com/cisco/Cisco.Lead2Pass.640-864.v2012-09-03.by.FRAIN.340q.vce.file.html
Hi Guys,
Please send me PDF Book of CCDA official book CCDA 640-864 Official Cert Guide, 4th Edition.
Here’s my email anjoy_galope@hotmail.com
Thank you in advance!!
passed with 95* latest dumps valid. No new questions
Question 20
Which aspect would most likely be found in the draft design document?
A. a list of QoS requirements
B. a note that there are no segments with more than 70 percent broadcast or multicast traffic
C. the level of redundancy or high availability that currently exists or is required in the network
D. the list of network infrastructure services whir h are in use, such as voice and video
what is the correct answer
Question 21
In terms of remote office design, which one of these statements is a characteristics only of a small
remote office (up to 50 user), and not of medium or remote offices?
A. Link redundancy to access layer switches is not possible with an integrated design.
B. A collapsed access and distribution layer is required.
C. There are no loops in the network design.
D. Layer 3 services such as DHCP, firewall, and NAT are provided by enterprise campus.
what is the correct answer
Which one of these statements should the designer keep in mind when considering the advanced routing features?
A. one-way router redistribution avoids the requirement for state or default routes.
B. Redistribution, summarization, and filtering are most often applied between the campus core
and enterprise edge.
C. Filtering only occurs on the routing domain boundary using redistribution.
D. Summarize routes at the core toward the distribution layer.
E. The hierarchical flexibility of IPv6 addressing avoids the requirement for routing traffic reduction using aggregation.
what is the correct answer
Be ware!
http://www.examcollection.com/cisco/Cisco.Lead2Pass.640-864.v2012-09-03.by.FRAIN.340q.vce.file.html
have some wrong questions.
This one look more ok to me from the first 20 questions.
http://www.examcollection.com/cisco/Cisco.ActualTests.640-864.v2012-08-29.by.Nawaz.334q.vce.file.html
Which one of these statements should the designer keep in mind when considering the advanced routing features?
B is the right
In terms of remote office design, which one of these statements is a characteristics only of a small
remote office (up to 50 user), and not of medium or remote offices?
C. There are no loops in the network design. – is correct
Thank you Theos
what about the following:
Question 20
Which aspect would most likely be found in the draft design document?
A. a list of QoS requirements
B. a note that there are no segments with more than 70 percent broadcast or multicast traffic
C. the level of redundancy or high availability that currently exists or is required in the network
D. the list of network infrastructure services whir h are in use, such as voice and video
what is the correct answer
question 23
Which statement represents a likely starting point for planning network changes?
A) Protocol assessment
B) Determining the design requirements
C) Determining the business needs
D) Determining the application requirements
what is the correct answer
Question 24
Define some of the activities, tools, and techniques used in today’s network design process.(Choose three.)
A) Analyzing network traffic
B) Simulation of network traffic
C) Network auditing
D) Filtering incoming network traffic
what is the correct answer
Question 25
Which of these is the next step after the design phase in the PPDIOO process?
A. Develop a high-level migration plan.
B. Develop the implementation plan in as much detail as possible.
C. Create a pilot or a prototype network.
D. Identify which network management protocol will be used for which function.
E. Order the equipment.
what is the correct answer
@ABC, question 20: answer is A, although people say that it’s C.
@ABC, question 21: answer is C, no loops in network
@ABC, 3rd question: answer is B, Redistribution, summarization,…
@ABC, question 23: answer is D, application requirements
@ABC, question 24; answer is A, C & D, no simulation of traffic
@ABC, question 25: answer is B, after Design it’s Implementation
thanks dstust, wrote the exams today had 940 dumps still valid new DND
Passed today; got 956. I would to thank everyone for their support over the past few weeks and special thanks to Ordermarker.
Please note that all the questions shared by Ordermarker were there.
GOOD LUCK TO ALL OF YOU
Regarding the D&D commented previously, i think this is the correct:
-VLANs and VSANs:
Physical networks and equipment set
– Cisco Unified Computing system:
Network,compute, and virtualization resources physically combined to deliver on optimized end-to-end virtualized environment
-Cisco VN-link technologies,including the Nexus 1000V virtual switch for VMware ESX:
Virtual machine visibility and policy control
-VSAN,virtual device contents, and unified fabric:
Simplified data center infrastructure and TCO
It can be obtained from here: http://www.lookingpoint.com/services/data-center
congrats ABC. Now go for CCDP. I’ll be taking mine end of November.
Hi, I just passed CCDA. 970 points. Enough studing from dstut.com and aiotestking.com.
A very good dump collection is ActualTests.640-864.v2012-08-28.by.Crainoss
All questions and D&D´s similar to those here and aiotestking.
3 New questions:
Two of them related to connecting different sites providing layer 2 connectivity using layer 3 connections. (I think something related to OTV).
The other question I don´t remember at all.
Good luck to all.
Are the questions for the CCDA mostly theoretical? I.E. are there simulations and or configuration labs similar to those featured in the CCNA and CCNP?