Share your CCDA v2.1 Experience
The new CCDA DESGN 640-864 Exam has come to replace for the old CCDA 640-863. It will take some time to update this site with this new exam. In the mean time we create this “Share your CCDA v2.1 Experience” section for everyone to share the experience after taking this new exam.
Please share with us your experience after taking the new CCDA 640-864 (CCDA v2.1) exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
i pass the exam today! 834! all question same with my dump paper! And i answer the same question! But only got 834! So please study carefully and verify the answer before dump to your mind!
Hi expermentlala,
wich one of the dumps did you use for study? Thank you.
Has anybody got the latest valid dumps?
Hi! experimentlala;
Good news that you also passed… Now both of us passed CCDA… Ho Ho Ho…
QUESTION 60
You are designing a small branch office that requires these attributes:
support for 60 users
the growth capacity to add another 15 users soon
redundant access
higher bandwidth between the Layer 2 switch and routing to the WAN
Which branch office topology or technology must be used?
A. EtherChannel
B. loop-free
C. three-tier
D. two-tier
E. integrated routing and switching
Answer: A
How is that the correct answer? EtherChannel is not a topology,
and I’m not seeing how etherchannel would help in a small office
of <100 users?
which branch office topology or technology must be used?
EtherChannel is a technology and would provide-
redundant access
higher bandwidth between the Layer 2 switch and routing to the WAN
@hippy
That makes sense now. Thanks!
Passed with a 970 today. But I used some other material like Pass4Sure and Lead2Pass. There is some variation in the answers though and some of it comes down to personal opinion. Also used the official study guide. Horrible questions in the exam actually and I complained in the feedback. Even with the questions in front of you and the official study guide you still can’t figure out the answer.
Like the WLC location. In the study guide it says it can go either in the distribution or core and not a lot more direction than that. I answered in the core. Who knows if that was one of the few that I got wrong.
Here is not a bad dump for free also.
http://www.examcollection.com/cisco/Cisco.Actualtest.640-864.v2011-02-23.by.anonymous.253q.vce.file.html
What organization created the FCAPS?
Is it the ISO or the ITU-T?
Hi Passit,
FCAPS is a Network Management model defined by ISO
Does anyone have a link or a copy of Lead2pass?
hey all can i have the latest p4s as well.
mail me at nirul2@yahoo.com / gokilavani.anandazkan@gmail.com
thanks in advance.
Im still looking for the latest dump….studying the CBT update 640-863 update but fear i may be missing something needed for the exam..
I need the new CCDA 640-864 Official Cert Guide, any help me please
Cn any help me?, I need to study de new CCDA 640-864 Official Cert Guide but I don´t have it, any share the guide.
Hi all – passed today. Used dump on examcollection. Mine was probably 80-85% valid. A couple new questions that I can’t remember (sorry…). DnD that I had can all be found here or in the comment sections.
Good luck to all. Honestly, if I can do it, you deff can.
Can anyone please provide a link to the latest Lead2Pass dump? Thanks.
I passed tonight with a 825/1000. Passing score of 790. There was 9 questions that I haven’t seen anywhere in my studies.
VSANs and VLANS
Device Context
Lots of Virtualization ?’s
3 Drag and Drop’s that I had never seen before.
I’ll try to find them.
Several new drag and drop questions not in this site and approx 5 new multi choice questions. Study well and you will pass
Placement of WLCs
WLCs are placed on secured wiring closets or in the data center. Deterministic
redundancy is recommended, and intercontroller roaming should
be minimized. WLCs can be placed in a central location or distributed in
the campus distribution layer.
640-864 4th edition pag 183
I passed today with 810/1000. All I can say is study from the 640-864 Official Books and do self research or readings. A lot of the solutions provided on this page are questionable and therefore, some may be wrong. There are a lot of new questions and about 5 DDs. 3 of which are described my other users above. Study hard and with some luck, you will pass!
Can any one share the latest dump here.. my paper in week time..Thanks
Can anyone update us if the “Cisco.Actualtest.640-864.v2011-02-23.by.anonymous.253q.vce.file” is still valid ?
Which of these statements is true concerning the data center access layer design?
A. The access layer in the data center is typically built at Layer 3, which allows for better shaping of services across multiple servers.
B. With Layer 2 access, the default gateway for the servers can be configured at the access or aggregation layer.
C. A dual-homing NIC requires a VLAN or trunk between the two access switches to support the dual IP address on the two server links to two separate switches.
D. The access layer is normally not required, as dual homing is standard from the servers to the aggregation layer.
Answer: B (Why? a Layer 2 Switch can be gateway?)
@fish
I’d say all the answers are wrong here …
@ASD
But if B is wrong,i think no answer is right…
i am taking preparation for CCDA .. can any one explain me about the question type plz and passing score and is there any similation or details question i have to ans or all mcq type ??
Does anyone know LEAD2PASS the latest version number?
@Vince,It’s 268q version on their official site.
please can any one clear me about the question type in real CCDA exam ………..?
@real (1)Multiple Choice (2)Single Choice (3)Drag & Drop.
I passed today with 970/1000. Here is a good dump: http://www.examcollection.com/cisco/Cisco.Lead2Pass.640-864.v2012-04-29.261q.vce.file.html . Good luck to all!
Today i did the exam but i have not passed, the score is 752 :-(
There were so many new questions and many D & D is not contained in the vce.
you test more reliable?
Passed the exam today with the score 883. This dump is valid. http://www.examcollection.com/cisco/Cisco.Lead2Pass.640-864.v2012-04-29.261q.vce.file.html
@stommy,about 5 questions can’t be found in the 261q vce(include about 2 D&Ds).but these questions can be found in the comments above.
is there any simulation type question in exam ?? and please say what is the passing score 790 or 825 ??? i am really confused !!!
@real 790
thank you Anonymous
@real No simulation type question in exam. (1)Multiple Choice (2)Single Choice (3)Drag & Drop.
thank you fish , now everything is clear to me …..
Does anyone have practice CD questions from the CD that comes with exam certification guide??
just passed with score of 839…dumps are still valid…
Cisco.Lead2Pass.640-864.v2012-04-29.261q
Cisco.ActualTests.640-864.v2011-06-20.by.Alex.253q
So the Cisco Practice test was nothing like the actual test. Can someone send me a PDF dump that will help for the next go around? Thanks. athlon2k2@yahoo.com
drag n drag questions still valid…
hi , passed today ….score 912…
http://www.examcollection.com/cisco/Cisco.Lead2Pass.640-864.v2012-04-29.261q.vce.file.html
good dump ..and 95 % valid …and 3-4 question u need to be correct .. and 3 new D@D ..and 4 new mcq…rest of them r same of dump…
Real, which 3-4 question did you correct?
Q Which aspect would most likely be found in the draft design doc
A. the level of redundancy or high availability that currently exists or is required….
Q. Characteristic only of a small remote site?
A. A collapsed Access and Distribution is required
Q.Which one of these statements should the designer keep in mind when considering advanced routing features.
A. The heirarchical felxibility of IPv6 addressing avoids…………….
Anyone have a pdf version of the dump?
Real, how many qtns were in the exam? what was the required pass mark?
Passed today 883, dump 80% valid, and the order of the answers change compared to the dump.