Share your ARCH Experience
Please share with us your experience after taking the ARCH v2.1 642-874 exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
Please don’t ask for links to download copyright materials here…
@kk: ok thanks for the feedback, seems like it’s indeed a rough-cut edition. Please let me know if you find it somewhere on-line.
Cheers
@eLex .. I found it here online for a free reading . .but unable to download.
hxxp://my.safaribooksonline.com/book/certification/ccdp/9780132652933
When I get a copy of the same will update you …
Hey Guys. I went for an exam and failed with 760+ using this version of .vce hxxp://depositfiles.com/files/yjm217l8q. It was one new D&D (very long choices) and a few new MCQ’s. But mostly everything is in .vce so it’s just the matter of making sure the answers are correct. So it’s almost solid a bit more love and care and it would be good.
@Bookworm .. sorry to here that .. you are 2nd person who did not make it I have heard in last two weeks one of my other friend at work wrote and he dint clear either .. this looks like a worm spreading to everyone .. I am planning to write this week .. lets see how it goes.
How many questions come from the latest AT 260Q PDF and .vce ?? any questions from old Anderson.vce 640-863 ?? can you brief little more on the DND and questions that you got ??
Thanks in advance, better luck next time.
@kk Take a look at .vce I used I would say 95% of questions came from there and probably about 10-15 questions were different from old Anderson 642-873 vce. One new D&D, with three from this .vce. So I would be only concern with last section of this .vce which has about 20 question which I didn’t find references for and they might have wrong answers, other sections I either cross-referenced with guide or old Anderson’s .vce (you’ll see either page # from guide, word guide or vce). So I hope you’ll clear it up next week.
sorry bro
bookWorm from the last AT they come the long D&D what u say ?
No, I used the latest AT at the time. Maybe next version would have that new D&D.
I think latest version is AT 5.5.
Regards
Kumar
Can any1 share a consolidated and updated/latest/correct dumps to make it easy for ppl like me 2 study n refresh the qns esp the new drag drop, new mcq. Also if any1 have AT5.5 or Pass4sure it would be gr8….Thanks…Sri
Latest can be found here . AT
http://www.examcollection.com/642-874.html
At 5.5? I am going thro the same…Hope some wrong qns as listed above are corrected….
@kk – U hav completed tis exam? Wat is t duration n no. of qns in t actual exam?
@Sri . I am talking this Friday .. on the same page as everyone ..
@kk that file have the new Drag and drop ?
there are total of 9 DND I am hoping all is covered..
Hi KK,
Here is the AT latest version – AT 5.5, i am also planning to take a exam with in 2 weeks please let me know once you have completed the exam.
http://www.4shared.com/document/7PpbLYVE/642-874_55.html
Best of luck!!!!
Regards
kumar
Hi,
Have uploaded the Latest Book here – 640-864 Official Cert Guide (4th Edition) here
http://www.4shared.com/document/oON9WzEr/CCDA_640-864_Official_Cert_Gui.html
All t very best 2 all
Reg.Sri
Thanks Kumar and KK….
@Sri you uploaded the CCDA Cert Guide. Do you happen to have the Rough Cuts: (CCDP ARCH 642-874), 3rd Edition? :)
Guys .. I finally sat for the exam today .. did not clear it .. 710/100 .. had total of 55 questions .. 4 DND all from AT , about 25 Ques from dumps .. rest all new .. about 5 questions on Nexus switch and Virtualization/VMWare , couple of questions on FCoE, iSCSI and NAS.
Also I observed couple of new options were there in some of the questions from the dump.
My suggestion will be if you not booked your exam, I would say wait for 2-3 months till the right books, reading material and proper dumps are out ..
Best of luck for all ..
kk can you check the vce file the new drag and drop is there, can you check that?
hxxp://www.examcollection.com/cisco/Cisco.ActualTest.642-874.v2011-07-30.by.METALMX.244q.vce
I was taking this exam a couple days ago. I am failed.. 750/1000. 3 month of reading… this is sad. I have no idea what is wrong. From this point it’s remember me a TSHOOT exam.. Btw, during exam I have seen a “single-choice” question with 2 right THE SAME answers. So, I guess, anyway to answer this question – I am wrong.
PS. Don’t give up all. May be need more accuracy and patience. All be right!
hi bd !
the questions were the same: hxxp: / / http://www.examcollection.com/cisco/Cisco.ActualTest.642-874.v2011-07-30.by.METALMX.244q.vce
many different questions?
@bd Hey Man, Don’t worry on TSHOOT I saw 3 absolutely same questions all with R4 being in question, I’ve picked what looked right and passed ))) But it was an only exam for a long time which took me the whole time available… I think with 642-874 we’re close I failed with 760+. As I said a bit more love and care and it will be a solid .vce Good luck to all.
@ccnp2011
Don’t know. This site not working on my computer today. Anyway.. a lot of questions are from actualtest 5.0 (5.5) 642-874. This is good, but… main trouble – it is really hard to find right answers for some questions (in official docs and books) ! Btw, latest VCE answers are not 100% valid, a lot of mistakes. I think, need to wait some weeks for more accurate VCE and read more :)
@BookWorm
Thx, dude :) Every fail – just a reason to be better! Next attempt soon. May be 2-3 weeks.
hi bd !
good luck!
thanks for comment .
@bd the only reason I said 2-3 months is because there is not even proper study guide , CBT training materials available in the internet yet for 642-874 . Trusting only with dumps is more of taking risk .. little reading from the book especially on non routing and switching areas like storage, VMware , FCoE would help a lot even if we get questions out of the dumps ..
Trust me Cisco is playing very smart these days … they are quite aware of the fact that lot of ppl used dumps and pass the exams .. its not easy anyone more .. some amount of self preparation and book reading is much needed.
@kk It’s definitely better to read a guide but if you have a solid dump, it’s more of a preference. If it works for you by all means do it. But I would not imply that it’s needed. I agree 100% that the only reason that we didn’t pass it yet – absence of proper guide and materials available, but it’s just a matter of time. Keep up good work guys, we’ll get there.
@kk
When I said about 3 month – it was not about your comment :) It’s about me, I’am reading about 3 month for this exam. Everything you said – totally agree. Dump is good ONLY as last step of preparation. Thus try to find any gaps in memory before exam.
Hi kk & BooWorm – Can u guys 4m ur experience @ t exam correct or list t qns which u feel r wrong in t VCE, which wud be of gr8 help 4 ppl like me who r plannin 2 take t same….thanks in advance guys….
@send – I do not have t Rough cuts…searched most of t sites i check regularly but in vain :(…
@Sri Take a look at last section of the vce I used, those are the ones I didn’t find any reference for and feel shaky about. Also on safari Rough Cuts are to be published in Nov’11 so that’s might be the reason why you couldn’t find it. hxxp://depositfiles.com/files/yjm217l8q.
Other sections could have wrong questions as well but at least I cross-referenced them with apparently solid 642-873 .vce from Anderson. Good luck.
Anyone get the drag and drop that asks you to match up layer 2 recommendations with requirements (not the simple UDLD/Etherchannel/Trunk/STP one I’ve seen everywhere, this is a new one, MUCH harder)? Or the VMWare & VSS questions they’re asking now?
Here is new D&D I haven’t seen before:
OSPF process with convergence step:
i.CEF
ii.SPF throttling or pacing timers
iii.Bidirectional Forwarding Detection
iv.LSA Propagation/throttling/pacing/Timers
match with
a.Detect the event
b.Propagate the event
c.Process the event
d.Update forwarding data structures
In answer it goes like this (I’m not sure if it’s right) : ii-a iv-b i-c iii-d
@Galtar I think I know which one you’re talking I’ve seen it on exam but it was log and I didn’t remember. I Hope did and would share it.
Guys check this one out AT 5.8 I’m would not talk about answers being right, but there definitely new questions you might want to look at. @Galtar there are some Virtualization ones as you were talking. Good luck hxxp://depositfiles.com/files/vjmaxxnm3
@BookWorm
Thanks for your link.
@ Author of this site:
You can add below dumps in examcollection for dumps seeker. cause this is updated dumps.
http://depositfiles.com/files/vjmaxxnm3
@BookWorm
Thank you for your update,
A.T v5.5 really have a lot wrong answers
Any confirmation on if the AT5.8 is t latest?? Has any1 taken this paper of late?
Guys do post some updates n correction/errors if any related to AT5.8 or the VCE files….
5.8
QUESTION NO: 19
In base e-Commerce module designs, where should firewall perimeters be placed?
A. core layer
B. Internet boundary
C. aggregation layer
D. aggregation and core layers
E. access and aggregation layers
Answer: D
I think should be A.. If you open “Designing Cisco Network Service Architectures (ARCH) v2.0” Volume 2 page 50 in PDF (7.40 in the book) – on the scheme a Base Design of e-Commerce module, and a firewall only in the core..
If “aggregation and core layers” – this is a Two Firewall Layers Design, I guess.
5.8
QUESTION NO: 22
When is a first-hop redundancy protocol needed in the distribution layer?
A. when the design implements Layer 2 between the access arid distribution blocks
B. when multiple vendor devices need to be supported
C. when preempt tuning of the default gateway is needed
D. when a robust method of backing up the default gateway is needed
E. when the design implements Layer 2 between the access switch and the distribution blocks
F. when the design implements Layer 2 between the access and distribution blocks
Answer: F
WTF? A and F are the same.., or not?)
@bd I got that same question and that’s the comment I left for Cisco on the exam “WTF?!! Cisco, the answers are the same” I get the feeling they don’t read them…
@Galtar, @bd
Option A – access arid distribution blocks
Option F – access and distribution blocks
May be Cisco can also do mistakes which is a Typo and also make sure that we dont mug t answers 4m t dumps!!!
Its just my thought ….
Any1 has taken t exam of late? Plz update…Im goin thro t old book n its kind of good read…but t subject is so dry wit so many things/details 2 remember!!!
Hi All
Got some new VCE not sure if its latest or valid…Guys who hav taken t paper earlier, kindly advice…
http://www.uploadstation.com/file/6EKtvBg/Cisco.CertifyMe.642-874.v2011-08-14.by.Anonym.254q.zip
Sorry…4got to add the password – http://certcollection.org/
T Zip file also has t VCE software…
Hi All,
))). Cisco.CertifyMe.642-874.v2011-08-14.by.Anonym.254q.vce was created by me.
I used actual test that found in forum of certcollection site. So will check with AT 5.8 and will give update.
Thanks Anonym…If only u had some kinda nickname it would be gr8 2 identify u :) So nice of u to do this work…Unable 2 get any site wer tis paper is discussed…Cisco materials also not yet available which makes this a bit more tuf 4 ppl like us!!!
@Bookworm or any1 who has written t exam…What do u think is t correct answer…
AT5.8 – QUESTION NO: 19
In base e-Commerce module designs, where should firewall perimeters be placed?
A. core layer
B. Internet boundary
C. aggregation layer
D. aggregation and core layers
E. access and aggregation layers
As per the figure in Page 318 it shows Firewall in the Core layer only.
From the CCDP-ARCH Book- 2nd edition, Page No: 318-319, the below lines are seen
“Core layer supports the first stage of firewalls” – which should mean t perimeter firewall.
The aggregation layer supports connectivity to the SLB devices or firewalls, in routed
mode. – Which indicates to another firewall for the LAN segment, to protect the various internal VLAN’s / Zones.
I would go for the Answer as A – Core Layer….
Kindly suggest/advice….
@Sri
Look at my post up) Copy-paste for you..
“5.8
QUESTION NO: 19
In base e-Commerce module designs, where should firewall perimeters be placed?
A. core layer
B. Internet boundary
C. aggregation layer
D. aggregation and core layers
E. access and aggregation layers
Answer: D
I think should be A.. If you open “Designing Cisco Network Service Architectures (ARCH) v2.0″ Volume 2 page 50 in PDF (7.40 in the book) – on the scheme a Base Design of e-Commerce module, and a firewall only in the core..
If “aggregation and core layers” – this is a Two Firewall Layers Design, I guess.”
So, I think, If they say about “Base design” – here a firewall only in the core. That is it.
@bd – Wat did u mean by Copy-paste for you?? I have taken the exact wordings related to the question from the book… :) I had just used the question under review for ppl like me 2 get the correct answer!!!
Wish all good luck if choice A – Core Layer is the correct answer!!! :)
@Sri
This mean that I wrote already about question #19 few days earlier here. I am done copy-paste (wrote again) my previous post.
Anyway, I guess answer A is correct. Because in “Base design” a firewall is placed only in the core level.