Share your ARCH Experience

@CV could you pls share your remarks on questions that you have learnt?

An engineer has been asked to design a LAN topology with high Availability and the loop-free features of STP. It must also support Etherchannel between multiple chassis and a separate control plane for each switch terminating these multiple connections. Which technology should the engineer recommend to be deployment on the upstream switches? A. StackWise B. VDC C. D. VPC VSS

Answer VPC

@CV could you share your remarks?

“separate control plane” = VPC

What’s your remarks till now for the questions on dumps 221?

@cv @guys can we add all our remarks on dumps in one single comment?

A Layer 3 link is used to connect two aggregation layer switches. Which kind of access layer topology design allows lot all access to aggregation uplinks to be active, but still have a backup in an uplink failure scenario? A. square looped B. loop-free inverted C. loop-free U

Which two benefits are achieved when GRE tunnels are selected over IPsec tunnels? (Choose two.) A. multicast forwarding B. network expansion C. data encapsulation D. encrypted traffic E. cost savings

@GUYS… loop-free U is the right answer, no prob there, GRE adv over IPSEC is obviously wrong:
Which two benefits are achieved when GRE tunnels are selected over IPsec tunnels? (Choose two.)
A.multicast forwarding
B.network expansion
C.data encapsulation
D.encrypted traffic
E.cost savings
Correct Answers: A and C… IPSEC is only able to encapsulate IPV4 packets, GRE can encapsulate anything

@GUYS previous comment is mine ;-)

Have you figure any wrong questions out ?

so I have used other dumps, I got 221q yesterday, so still have not gone through all, it has few wrong answers (very few) you can pass as-is with it for sure, next one is wrong too:
A customer with 30 branch offices requires dynamic IGP routing protocol, IP multicast, and non-IP protocol support.
Which solution satisfies these requirements?
A . dmvpn spoke-to-spoke
B . dmvpn hub-and-spoke
C . vti
D . p2p gre
E . IPsec direct encapsulation
Correct Answer A. dmvpn spoke-to-spoke

An engineering team must design a firewall solution with shared hardware resources but separation of features such as ACLs, NATs, and management between the external business partners of the organization. Which ASA deployment mode meets these requirements? A. clustering mode B. multicontext mode

@GUYS multicontext is right for that one

The network uses STP. All switches use the default priority. Which switch will be the root bridge?
1st the picture shows only one switch is using cisco’s default priority 32768, if ALL WERE, then lowest MAC is S4 it becomes root. However as per the picture there are two that match as lowest priority S1 and S3… between those S1 has the lower MAC it becomes root…. pick S1 or pick S4 they both make sense… S2, no way

A network engineer must design a full mesh overlay VPN network. The proposed setup must be scalable, support multicast services, and be suitable for deployment over public internet .Which overlay VPN technology must be used? A. IPsec B. GRE C. DMVPN D. GETVPN

We should pick S1 ?…@cv or what do you guys suggest ? As S1 satisfied the requirement

What is the correct answer? AD or BD?

While designing quality of services policies, which two of traffic must be prioritized as management traffic?
(Choose two)
A. HTTPS
B. RADIUS
C. ICMP
D. SSH
E. SCP

Refer to the exhibit. The network uses STP. All switches use the default priority and have the same bandwidth. Which description of the network is true?
A. S3 is elected as the root bridge.
B Host A can always reach host B through S1
C. The redundant links between the switches are blocked
D. S2 is elected as the root bridge.
I believe the question here should read, Which description of the network is NOT true? (D), as-is, A, B and C are all true descriptions of the NW…

@Patt
Please share the prepaway June 2019 with 100 Qs.
TIA.

@Ley
Please share the famous prepaway June 2019.
Thanks.

@Erwafu, A and D (SSH and HTTPs) are quite reasonable

You are designing a NAC security solution that must group machines into objects and provision security policies based on those objects Which technology do you use?
A.VXLAN
B.802.1Q
C.RBAC
D.Cisco TrustSec
To me that’s D Cisco Trust Sec includes ISE which does endpoint detection and classification, and builds an endpoint database.

@cv agree!

You must increase the speed of convergence. Which action do you take for EIGRP?
A.Disable split horizon at the hubs
B.Increase the hold time value.
C.Enable stub routing on the spokes
D.Decrease the hold time value
Correct Answer: C Enable stub routing on the spokes,

passed! 968/1000, final day to take the exam here. thank you to those who shared the dump especially prepaway june 2019 from previous pages. that’s spot on per question and answer, that’s all you need to pass.

got 4 dnd bout campus tier, iacl, route process and subnet. thanks to everyone!

@Prasant
Congratulations on passing with an awesome score.
Can you please point me to where I can find the prepaway june 2019 dump.
Thanks much.

Have you take a look in prepaway June?

hey guys. I have passed with 910 today and used the latest dump from a certcollection groupbuy. Since its near the end for this cert happy to share it members of this page.

Just shoot me an email and I will send through the pdf (3.34Mb pdf file)

silver097 @ gmail . com

Hey Jackson, piss off.

Any feedback on today’s exam?…what questions

Share the link for the PDF

@jackson please share the link dumps

legacy OSPF network design solution historically included a large number of routers in a single backbone area 0. The network currently has over 300 OSPF routers. How is this network redesigned to further expansion? A. Implement route summarization on the routers in backbone area. B. Break down area 0 into smaller non-backbone areas. C. Use EIGRP routing protocol instead of OSPF. D. Adjust OSPF timers to smaller values.

Any feedback!,,

Could anyone share his exam experience for today ??

Any feedback from your side as today is the last day ? @CV

i have dumps. please email silver097 @ gmail . com
i don’t want any cash guys so chill

Could exam takers give their feedback?

Send the link on a share drive

congrats to all who passed…
Which two characteristics of MSDP when designing an interdomain multicast network are true? (Choose two.)
A. MSDP is a mechanism that allows RPs to share information about active sources.
B. Any network utilizing iBGP or eBGP can use MSDP.
C. In the PIM-SM model, multicast sources and receivers must register with their local RP.
D. RPs in other domains have full knowledge of sources located in other domains.
E. The MSDP speaker periodically sends SAs that include all sources in all discovered domains.
ANS: A, C as per cisco.com … I guess B is wrong because only those networks running MBGP can use MSDP

Apparently most of answers on 221 dump are incorrect? What do you think? Have you went through all the dump?

probably 1 in 20 are wrong on 221, should still help you pass… all dumps I have seen have errors

Have you reached to Q221 ? Is it a good to go? Or still figuring out?

Any comment or conerns on dumps and exams takers for today?

@CV @jackeson

Any updates ?

You are using the MST protocol. Which standard protocol is used inside each MST instance to provide fast convergence? A. 802.1s B. 802.1w C. 802.1d D. 802.1q

Any new observations?

@GUYS, 802.1w… MST is .S but each STP on it is RSTP, which is .W
I think Q83 is totally stubby area… which is the type of area that only gets DEFAULT Route
Most of the questions are fine

@CV what do you think ??