Share your ARCH Experience

VPN minimum configuration. Easy to deploy vpn in multivendor site Spoke to spoke.
A. DMVPN
B. IPSec fast encapsulation
C. Ip sec vpn
D. Get vpn

The correct answer should be C not B as it is in the dumps, because “IPSec fast encapsulation” does not exist.

What do you think?

An engineer is designing an OSPF network with multiple nonbackbone areas connected to the backbone area via a hub-and-spoke topology. Each hub-and-spoke area has a large number of spoke routers connected to the hub that is functioning as an ABR to provide better segmentation. Which two actions improve the stability of this design? (Choose two.)

A. Configure hub-and-spoke areas as stub.
B. Use External Type 2 metric: across the OSPF domain.
C. Configure hub-and-spake areas as totally stubby.
D. Implement summarization on the ABR routers of hub-and-spoke areas.
E. Implement summarization on the ASBR routers in the backbone area.

The correct answer should be C&D not D&E as it is in the dumps, because in “Foundation Learning Guide CCDP ARCH 300-320, 4th Edition” section “OSPF Hub-and-Spoke Design” is written:

“Therefore, it’s always recommended, in hub-and spoke topology, to place the spokes in a stub area to minimize the amount of information within the area. In fact, you should aim to configure the areas as stubby as possible. That’s why totally stubby areas are considered even better in this case. ”
[…]
“using stub and totally stubby areas further reduces the workload on an OSPF router ”
[…]
“The conclusion is that area size and layout design, area types, route types, number of ABRs/ASBRs, redistribution, and summarization all affect the size of the LSA database in any single area. Therefore, use this general advice to achieve a simple-to-manage and easy-to-scale OSPF design:
■ Keep it simple (for example, avoid multiple redistributions points, large numbers of prefix lists, and routing polices).
■ Keep it stubby (or keep it totally stubby, especially for remote sites).
■ Limit the number of ABR/ASBR routers to the minimum per area.
■ Keep it summarized (using a structure IP addressing scheme is key to achieving optimal route summarization design).”
[…]
“Therefore, considering stub areas, totally stubby areas, and summary routes helps reduce the size of the LSDB and impose a more
stable OSPF network by isolating the area from propagating external changes.”
[…]
“…to maintain a reliable and scalable OSPF, you should consider network route summarization where possible. Typically, ABRs provide opportunities to support route summarization or create stub or totally stubby areas.”
[…]
“You should always keep it simple, keep it as stubby as possible, and keep it summarized.”

What do you think?

When designing a Data Center Interconnect solution, which two statements describe benefits of utilizing A-VPLS for Layer 2 extension? (Choose two.)
A. Redundancy is addressed without enabling Spanning Tree Protocol in the core.
B. The overlay of the Layer 2 connection on the Layer 3 transport hides any physical convergence.
C. Integrated Layer 3 technology responds upon failure.
D. A-VPLS utlzes the Cisco Catalyst 6500 Series VSS feature to provide native dual-homing.
E. A-VPLS provides flow-based load balancing over equal-cost multipath paths.

The correct answer should be D&E not B&E as it is in the dumps, because at

cisco.com/c/en/us/solutions/collateral/data-center-virtualization/data-center-interconnect/design_guide_c07-647422.html

The Cisco ® Layer 2 VPN (L2VPN) Advanced VPLS (A-VPLS) feature introduces the following enhancements to VPLS:
• Capability to load-balance traffic across multiple core interfaces using equal-cost multipathing (ECMP)

Simplified Redundancy

A-VPLS is supported by the Cisco Catalyst ® 6500 and Catalyst 6800 Series Virtual Switching System (VSS).
A-VPLS benefits from the multihoming features of VSS and does not require Spanning Tree Protocol for loop prevention.
A-VPLS needs to be configured only once

What do you think?

In a large hub and spoke EIGRP network, which solution would be for resource minimal usage?

A. stub routing
B. network summarization

I think the correct answer is B not C as it is in the dumps, because they say on

cisco.com/en/US/technologies/tk648/tk365/technologies_white_paper0900aecd8023df6f.html

ciscopress.com/articles/article.asp?p=687478&seqNum=5

Network administrators who wish to provide greater EIGRP network stability, reduce resource utilization, and simplify configuration are advised to investigate the EIGRP stub router functionality.

Using the EIGRP stub routing feature improves network stability, reduces resource utilization, and simplifies stub router configuration.

and in “Foundation Learning Guide CCDP ARCH 300-320, 4th Edition” section “EIGRP Hub-and-Spoke Design”:

Stubs are a must in an EIGRP hub-and-spoke topology if you want to achieve a resilient, scalable, and reliable design.

[…]

Furthermore, the other key scalability consideration in this design is summarization. Bandwidth and memory can be conserved by summarizing advertisements to spokes. Advertise either the default route or a carefully selected group of summarized networks. However, if EIGRP stub routing at the spokes is not enabled, even after routes that are sent from the hub router to the spokes have been filtered or summarized, there is still a potential of network instability or slower convergence time following a network failure event.

What do you think?

*I think the correct answer is A not B

guys is there any SIM or lab in the exam ?

thx

hi intacct

I think A – stub routing in above question.

NEW QUESTION 348
Which technology should a network designer combine with VSS to ensure a loop free topology with optimal convergence time?

A. Portfast
B. UplinkFast
C. RPVST +
D. Mulitchassis EtherChannel

Answer: C

C or D ?

100% D. Mulitchassis EtherChannel

Multichassis EtherChannel (MEC) is a Layer 2 multipathing technology. This form of EtherChannel allows a connected node to terminate the EtherChannel across the two physical Cisco Catalyst 6500 Series Switches that make up the VSS leading to creating simplified loop-free Layer 2 topology. Using MEC in VSS topology results in all links being active and at the same time provides for a highly available topology without the dependency of Spanning Tree Protocol. With the introduction of 12.2(33)SXI, the virtual switching system supports a maximum number of 512 MECs.

@intact

For this question:
An engineer is designing an OSPF network with multiple nonbackbone areas connected to the backbone area via a hub-and-spoke topology. Each hub-and-spoke area has a large number of spoke routers connected to the hub that is functioning as an ABR to provide better segmentation. Which two actions improve the stability of this design? (Choose two.)

A. Configure hub-and-spoke areas as stub.
B. Use External Type 2 metric: across the OSPF domain.
C. Configure hub-and-spake areas as totally stubby.
D. Implement summarization on the ABR routers of hub-and-spoke areas.
E. Implement summarization on the ASBR routers in the backbone area.

I agree with C&D.

Actually I think this question is in Gon and the answer is C&D

Congratulations!!!

Passed the 300-320 exam on 14/June/2019.

Questions are all from the new PassLeader 300-320 dumps.

Good luck, all!

p.s.

Part of that PassLeader 300-320 dumps FYI:

drive.google.com/drive/folders/0B-ob6L_QjGLpUjVQcjU5aFFtWVU

Good luck!!!

[(copy that link and open it in your web browser!!!)]

Should I trust the dump in URL drive.google.com/drive/folders/0B-ob6L_QjGLpUjVQcjU5aFFtWVU for Arch exam.

I am sharing the trustworthy CCNP 300-115 on Twitter. If you are preparing for the exam, it may be right for you.
twitter.com/chen051989/status/1140801673389993984?utm_source=114080167338999398

I am sharing the trustworthy CCNP 300-115 on Twitter. If you are preparing for the exam, it may be right for you.
twitter.com/chen051989/status/1140801673389993984?utm_source=114080167338999398

When designing a Data Center Interconnect solution, which two statements describe benefits of utilizing A-VPLS for Layer 2 extension? (Choose two.)
A. Redundancy is addressed without enabling Spanning Tree Protocol in the core.
B. The overlay of the Layer 2 connection on the Layer 3 transport hides any physical convergence.
C. Integrated Layer 3 technology responds upon failure.
D. A-VPLS utlzes the Cisco Catalyst 6500 Series VSS feature to provide native dual-homing.
E. A-VPLS provides flow-based load balancing over equal-cost multipath paths.

The correct answer should be D&E not B&E as it is in the dumps, because at

cisco.com/c/en/us/solutions/collateral/data-center-virtualization/data-center-interconnect/design_guide_c07-647422.html

The Cisco ® Layer 2 VPN (L2VPN) Advanced VPLS (A-VPLS) feature introduces the following enhancements to VPLS:
• Capability to load-balance traffic across multiple core interfaces using equal-cost multipathing (ECMP)

Simplified Redundancy

A-VPLS is supported by the Cisco Catalyst ® 6500 and Catalyst 6800 Series Virtual Switching System (VSS).
A-VPLwS benefits from the multihoming features of VSS and does not require Spanning Tree Protocol for loop prevention.
A-VPLS needs to be configured only once

What do you think?

I made it today with 9xx/1000. everything here is valid!

I am now moving on to Next Exam

Share latest examm Questions enjoy

Without 2 ***
https:/*/eze*e.link/Q4ip0SG4xT

VPN minimum configuration. Easy to deploy vpn in multivendor site Spoke to spoke.
A. DMVPN
B. IPSdvec fast encapsulation
C. Ip sec vpn
D. Get vpn

The correct answer should be C not B as it is in the dumps, because “IPSec fast encapsulation” does not exist.

What do you think?

A valid recommendation for 5,000 people on ins. Real CCNP learning materials helped me pass the exam with ease
twitter.com/chen051989/status/1140801673389993984?utm_source=66

A valid recommendation for 5,000 people on ins. Real CCNP learning materials helped me pass the exam with ease
twitter.com/chen051989/status/1140801673389993984?utm_source=66

Thanks!

Congratulations!

Took the CCDP 300-320 ARCH exam recently and finally passed for the second try!!

960 points and now I’m CCDP~~~LOL!!!

Thanks PassLeader valid 300-320 dumps, I got almost all new questions from PL, though some answers may not 100% correct.

I suggest you to check the answers from the Official Cert Guide.

Congratulations!

Took the CCDP 300-320 ARCH exam recently and finally passed for the second try!!

960 points and now I’m CCDP~~~LOL!!!

Thanks PassLeader valid 300-320 dumps, I got almost all new questions from PL, though some answers may not 100% correct. I suggest you to check the answers from the Official Cert Guide.

By the way, the 300-320 ARCH exam contents are very stupid and not really shows your knowledge in modern networks.

All in all, a pass is a pass!

Thanks PassLeader valid 300-320 dumps!

@David Okulicz June 17th, 2019

Also thanks for your reviews.

Good luck, all!

Good day all,
Just a new on this is page, looking to start preparing recertification,
Would like to know what are the type of questions included in ARCH.
Was there any simulation or just normal Cisco Q&A(single/multiple ans., Drag&drop) without simulation?
Thank you and Cheers!

was trying to back read but couldn’t find definite answer, can see only few D&D and MCQ questions

free share cisco idea

Share Cisco’s learning methods for free, I hope to help you.

Share Cisco’s learning methods for free, I hope to help you. If necessary, please see my name.

Hello everyone,GOn Dec_2018 180Q and 66Q are still valid?

While designing quality of services policies, which two of traffic must be prioritized as management traffic?
(choose two)
A. RADIUS
B. SSH
C. HTTPS
D. ICMP
E. SCP
Correct Answer: AB

AB or BC ?

@Asinha, do you have a link for 66Q ?

Thanks!

To get through the CCNP exam quickly, it’s important to find a good way. Otherwise it will waste time
twitter.com/chen051989/status/1140801673389993984?utm_source=24

Congratulations!

Took the CCDP 300-320 ARCH exam recently and finally passed for the second try!!

960 points and now I’m CCDP~~~LOL!!!

Thanks PassLeader valid 300-320 dumps, I got almost all new questions from PL, though some answers may not 100% correct. I suggest you to check the answers from the Official Cert Guide.

By the way, the 300-320 ARCH exam contents are very stupid and not really shows your knowledge in modern networks.

All in all, a pass is a pass!

Thanks PassLeader valid 300-320 dumps!

@David Okulicz June 17th, 2019

Also thanks for your reviews.

Good luck, all!

+1

@Larry

NO Simulation. Mostly MCQ and D&D.

@Asinha

180q and 66q are partially valid. There are new questions added.

Pass today with 99X score, mabe I wrong only one question. Gon and new questions here are vaid! But some questions I answered by myself!

Thank all

HI GUYs Kindly share the Dumps please with all new questions

who can help with SP:O:TO Cisco 300-320 practice test

The best preparation for the Cisco exam, I passed the 300-115 exam with the help of it.
twitter.com/chen051989/status/1140801673389993984?utm_source=T

@cloud
Congratulations on your awesome passing score.
Please share your answers that differed from Gon and new questions here (i.e., the questions you answered by yourself).
Thanks.

if you confuse some questions, post here and I can correct them or share the answer I did in the exam!

Because of the exam materials, my 300-101 exam preparation was very easy, and the exam was very smooth, so I completed the CCNP exam.
twitter.com/chen051989/status/1140801673389993984?utm_source=T05050626

The best preparation for the Cisco exam,
http
://c7.gg
/fCXw8

I am looking for GON 180 Questions can anyone help me I have PL 628 Q

Congratulations!

Took the CCDP 300-320 ARCH exam recently and finally passed for the second try!!

960 points and now I’m CCDP~~~LOL!!!

Thanks PassLeader valid 300-320 dumps, I got almost all new questions from PL, though some answers may not 100% correct. I suggest you to check the answers from the Official Cert Guide.

By the way, the 300-320 ARCH exam contents are very stupid and not really shows your knowledge in modern networks.

All in all, a pass is a pass!

Thanks PassLeader valid 300-320 dumps!

@David Okulicz June 17th, 2019

Also thanks for your reviews.

Good luck, all!

+1

+1

Hey ya’LL! I took the ARCH exam a few weeks ago and passed. I studied GON180 & 66 and alot of the info shown here on these posts. New_Questions_Collector helped alot.
There are some new questions not in GON180&66. Cant recall what. Just make sure you know the GON180&66. The posts for PassLeader dumps is excessive. Its overkill. I’m sure Passleader dumps can help but that’s going thru hundreds and hundreds of their questions. I didn’t do that and i still passed. Just dig and LOOOK thru these postings and read the ones from those who passed and go over them again and again. You will catch on to which ones are just trying to sell dumps and the ones sincerely trying to help. Take your time. Dont rush it. Know it and you will pass. If you rush thru this youre gonna screw up and then need to retake. Too much money dont waste it. There are some drag and drops. One was North-South and East-West.
Anyway good luck, have fun.
fyi.. i got this one about NAT: It was tough, i didnt look to hard but did not find any good info on the web for this one: The question also had a big diagram. But this is pasted from an earlier post: New_Questions_Collector
May 18th, 2019

Q1 NAT question with a diagram Scenario with two companies merging and need to create an outside NATpool as a solution. The options were to select the right command for the scenario.

Answer: As one to one static mapping is the solution in this case. #ip nat pool MonPool 1.1.1.2 1.1.1.254 netmask 255.255.255.0

My exam preparation is valid. I successfully passed the CCNP 300-115 exam. I have searched a lot of websites for reliable exam materials. I chose it in the comparison of many websites because I think this website is trustworthy. My test results confirm my guess. I put this real and effective material. The website is shared with everyone and I hope to help you with your Cisco exam.

My exam pay is worthwhile. Before I took the exam, I found a lot of material websites to compare. I finally decided that a website with many users recommended. I passed the CCNP 300-101 exam. I am glad to choose to trust the netizens.
yidalipao66.tumblr.com/post/185904304308/stable-and-efficient-dumping-the-dumping-problem?utm_source=16709311996

My exam pay is worthwhile. Before I took the exam, I found a lot of material websites to compare. I finally decided that a website with many users recommended. I passed the CCNP 300-101 exam. I am glad to choose to trust the netizens.
yidalipao66.tumblr.com/post/185904304308/stable-and-efficient-dumping-the-dumping-problem?utm_source=16709311996

What does the current European Telecommunications Standards Institute rule state is the 2.4-GHz maximum transmitter output power for point-to-point installations?
A. 16 dBm
B. 17 dBm
C. 20 dBm
D. 30 dBm
E. 36 dBm

One source says 17 dBm and other 20dBm?

What is not an option in FlexConnect mode? (choose two)
A. Local authentication, local switching
B. Local authentication, central switching
C. Local switching, central authentication
D. Central authentication, central switching
E. Central authentication, local switching
F. Central switching, local authentication

A customer has completed the installation of an 802.11ac greenfield deployment at their corporate headquarters. They would like to leverage 802.11ac enhanced speeds on the trusted employee WLAN. wIn order to configure the employee WLAN, what Layer 2 security policies are valid
A. WPA2(TKIP)
B. WPA(AES)
C. OPEN
D. WEP

Dump says C. Is it becouse Q says on trusted employee WLAN ?

Which three items are allowed on an Ethernet trunk port? (Choose three.)
A. autonomous AP
B. FlexConnect AP
C. local fAP
D. monitor AdP
E. rogue detector AP
F. sniffer AP
G. SE-Connect AP
H. Cisco WLC

A and B for sure. But, E or C ?

A WLAN deployment uses a combination of Cisco Aironet 1260 APs and multiple Cisco 5500 Wireless LAN Controllers to provide wireless LAN access to end- users. The network administrator has decided to use DHCP Option 43 to enable the APs to discover the wireless LAN controllers. When configuring the DHCP scope, which format should be used for the Cisco WLC addresses?
A. a comma-separated ASCII string of Cisco WLC AP-manager addresses
B. a commae-separated ASCII string of Cisco WLC management addresses
C. a comma-separated ASCII string of Cisco WLC virtual IP addresses
D. a hexadecimal string of Cisco WLC AP-manager addresses
E. a hexadecimal string of Cisco WLC management addresses
F. a hexadecimal string of Cisco WLC virtual IP addresses
Dump says: E
Why not B since it is AP 1000series ?

Which three WLC debug commands are appropriate to troubleshoot a wireless client that is associated to an AP? (Choose three.)
A. debug capwap
B. debug mac addr
C. debuwdgd dot11
D. debug dhcp
E. debug ap
F. debug dtls
Dump say BCD