Share your ARCH Experience
Please share with us your experience after taking the ARCH v2.1 642-874 exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
Please don’t ask for links to download copyright materials here…
Pedram,
I also crossed checked,for Q13 you are ryt and Q21 got only A in book could not able to find B. if you got B in book then can take it final call for this question is AB ryt ans..
i agree Q21 might have wrong answer in AT5.8
Hi,
Some useful link with cisco training material…
https://learningnetwork.cisco.com/community/certifications/ccdp/arch?tab=2
U need a valid Cisco login though….
REg..SRidhar
Thanks Sri,
Layer 2 and E commerce quick learning module
http://www.cisco.com/web/learning/le31/le46/cln/qlm/CCDP/arch/layer-2-design-2/player.html
http://www.cisco.com/web/learning/le31/le46/cln/qlm/CCDP/arch/identifying-common-component-designs-for-ecommerce/player.html
@ kumar
Q21 student guide v2 volume 1 page 180
“The various kinds of Open Shortest Path First (OSPF) stub areas can be thought of as a simpler form of summarization.”
“OSPF cannot filter prefixes within an area.”
second one is a note, probably Sri doesn’t like that ;-P
also self-study v2 page 110 “OSPF cannot filter prefixes within an area.”
@Kash
Could you please comment ref page about A for Q13. I couldn’t find anything about “multicast EMS” (probably typo of multipoint EMS) but on VPLS “Broadcast and multicast traffic would always be flooded in VPLS.” and problem with that is radiation not inconsistency. self-study page 176,177
Q44
D self-study v2, page 414
Q46
A self-study v2, page 118
Q61 I would say C
Q73 A
Q79 has 3 correct answers! B,C,D
Pedram,
Q44: I did n`t get ryt ans, could not able figure out the ryt ans from below matter which i took it from book..
Many factors affect scalability of an IPsec VPN design, including the
number of route sites, access connection speeds, routing peer limits, IPsec encryption engine throughput, features
to be supported, and applications that will be transported over the IPsec VPN.
The number of remote sites is a primary factor in determining scalability of a design and affects the routing plan,
high-availability design, and ultimately the overall throughput that must be aggregated by the VPN headend
routers. Different routers can support different numbers of tunnels
Q46: A is the ryt ans.
if possible could you please upload the self study book.
@kumar
I just want to comment on that :-) Q44 E is correct as high availability is part of “features to be supported”; just consider the sentence form most to least, last one is application to be supported.
AT5.8 Q40
A= The VPN termination device can be deployed in parallel with a firewall, inline with a
firewall, or in a demilitarized zone (DMZ).pAGE409
D=Clientless access for SSL VPNs does not require specialized VPN software on the user
desktop, because all VPN traffic is transmitted and delivered through a standard web
browser, which minimizes provisioning and support concerns. – pAGE406
c==Smaller organizations typically configure a few static routes to point to the VPN device
and do not need RRI. The RRI function is usually of more benefit to larger organizations
that have more complex requirements (for example, organizations that do not have a
dedicated scope of DHCP addresses that are associated to a specific VPN headend). pAGE409
The experts…kindly clarify as 2 which is t rite answer plz….
Q42
B-Filters can then be used so that only the default and any other critical prefixes are sent to
remote sites. -Page112
D-Although packet filters can also be used to filter outbound traffic, protocol filtering is
typically preferred for outbound (egress) traffic. -Page497
The experts…kindly clarify as 2 which is t rite answer plz….
Sri
Q43 – D Table 10-2 in Page500. Is this correct???
@Sri
Which book are you using? I couldn’t find your refs. q40 D is correct, Q 42 I am with C but most other guys are with B Q43 D is correct
I am using the Second Edition Book containing 624 Pages. I will upload the book and also the AT5.8 with notes/correct answer references soon…Work in progress..
Q53 – – Need explanation
Q55 – – Need explanation – Page200
Q58- A,C,D,E – Self-study v2, Page48
Q61 – A
Refer – http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9902/white_paper_c11-558242.html
Virtual servers can now use the same network configuration, security policy, diagnostic tools, and operational models as their physical server counterparts attached to dedicated physical network ports.
Is this correct?
Q61
I have 3 years experiences with VMWare ESX, vSphere and vCenter, for me A is completely wrong as you can add new sever in your virtual infrastructure without any physical change in network. But in network part you should just define a trunk port and connect it to your ESX host and only have small administration ability on that part. The only thing I can see is Nexus add new virtual access switch to the VMWare hypervisor and I would go for C.
I think I should check Nexus architecture more in details and its way of working as I didn’t have any experience on that. If somebody have exp. on this part please make clarification on.
Q85 – Is it NAC NAS or N/w attached storage.
If its NAC NAS then answer A is right. Ref. Pg370 of Self study guide-v2
Else if its NAS…im not sure…can any1 help on this???
Sorry guys , for late reply
I spent 20 minutes on Q13 i beleive it is correct on AT , if i am remebering it right me and victor work out this answer from the book
Q61 as per my understanding Nexus 1000 is sorth or virtual switch and it helps amdin to look detailed packet analysis and Qos on each server based traffic … i would go with C
Sorry i mean sort of virtual
@Kash
Q13, E is stated word by word in ref as I commented above
one point i woulld like to make .. dont look for word to word sentense understand the consept you might find a lot of word by word reference … but it might not be correct with reference to your questions … I hope you got it what i mean .
As per the book, I will also go for E only..
@Kash
Really?!! thanks for that mate! for me Q13 is pretty clear. I think your last comment is just means you try to make the answer looks like kind of mystery!!
Hi All,
I have finally made a consolidated AT5.8 with Correct Answers as discussed in this forum along with reference to the Study Guide – Second Edition Book. Hope its helpful. Do correct me if i have made some wrong references or wrong answers…Comment the corrections as a consolidated 1 so tat i can correct the same n upload again!!!
http://www.4shared.com/document/RqI1mC53/642-874-AT58-Mod.html
http://www.4shared.com/document/FYLd488c/CCDP_Study_Guide_-_With_Notes.html
The relevant answer points are highlighted in yellow in the above book.
Enjoy t reading…
@Pedram, kash, kumar – Hav u guys gone thro the above links i posted…Kindly do share and share ur comments please….
Sri,
Going thru your stuff only, seems to be you have put a lot of efforts to get the ryt ans… nice job!!! really its useful for all of us..
Sri,
Q48:E is ryt..
Sri,
Here are the couple of questions which i found mistakes in your document..
RYT ans:
49:DF, 50:C,q56:C,
Sri,
As per the diagram which is in page 581, ans is B only,
NBAR : L3-L7
Netflow : L2 – L4 or L7
@bd
@Kash
passed it :-) around 900/1000. thanks for all your help guys
Vss STP was right in the D&D
all the OSPF and EIGRP in AT are useless , I changed all my answers an scored much higher in that section
Multicast D&D was wrong as well , thanks mcaster
P4s is fail4sure on this one
@Victor – Congrats…Can u share the answers 4 t Drag n drops….Also post ur section wise score. If u can check the links i had posted above and comment on the same, it would be great as i plan 2 take the exam soon….
Any new question u got other than the ones in AT5.8??? If so do share the same. Was ter wireless questions??
hi Victor
Congrats !
Can u share the answers.
thank´s
@ victor
Congrats!
i remade the latest file from sri in vce format with working drag and drop
if i post the file somwone can test with me?
@burlok….U can share it….but there r some errors which i am in t process of correcting…I wil test the same and comment…
yes sri if you check we can be able to have a great file in 2-3 days
the file is here
http://www.megaupload.com/?d=E2WGRRWX
I am checking the answers for those wer i had lef out n also for those wer some answers r wrong..Give me a day or 2 to bring a almost perfect doc…
@pedram, victor, bd – Share ur feedback on my file plz so that some myself n t rest r better prepared….
@sri i made my best with your file to give a real exam experience
grat job man
can somebody let me know what are the D & D`s right in AT 5.8?
Victor,
could you please share the ryt ans(AT5.8) which you have mentioned in your earlier post.
Hi all,
I have collected total D&D in AT 5.8, please let me know which all are ryt and wrong
Q3,7,15,27,64,121,123,161
@kuma @anonimous please check this file
http://www.examcollection.com/cisco/CISCO.Actualtest.642-874.v2011-08-20.by.burlok.271q.vce.file.html